Juniper Networks SRX 210 manual Installing the SRX210 Services Gateway, Chapter

Chapter 12

Installing the SRX210 Services Gateway

This chapter includes the following topics:

■SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines on page 69

■SRX210 Services Gateway Installation on page 69

■Replacing or Installing Mini-Physical Interface Modules in the SRX210 Services Gateway on page 78

SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines

To avoid harm to yourself or the device as you install and maintain it, follow the guidelines for working with and near electrical equipment, as well as the safety procedures for working with devices. For a discussion of how to make the installation site a safe environment and a list of safety warnings, see the Appendix for Safety and Regulatory Compliance Information.

NOTE: Providing an exhaustive set of guidelines for working with electrical equipment is beyond the scope of this guide.

Related Topics ■ General Site Guidelines for Installing the SRX210 Services Gateway on page 51

■Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway on page 59

■Preparing the SRX210 Services Gateway for Rack-Mount,Desk-Mount, and Wall-Mount Installation on page 65

■General Site Guidelines for Installing the SRX 210 Services Gateway

SRX210 Services Gateway Installation

You can install the SRX210 Services Gateway in a rack, on a desk, or on a wall. The device includes rubber feet for desk and wall mounting. The mounting brackets are optional accessories.

SRX210 Services Gateway Safety Requirements, Warnings, and Guidelines ■ 69