Manuals / Juniper Networks / Computer Equipment / Network Card

Juniper Networks SRX 210 3G ExpressCard Physical Specifications continued, Voltage supply, 3.3V

Models: SRX 210

1 200
Download 200 pages 27.83 Kb
Page 52
Image 52
Table 15: 3G ExpressCard Physical Specifications (continued)

SRX210 Services Gateway Hardware Guide

Table 15: 3G ExpressCard Physical Specifications (continued)

Specification

Value

 

Voltage supply

■

3.3V

(primary source)

 

■

1.5V

(secondary source)

Related Topics ■ SRX210 Services Gateway 3G ExpressCard Basic CLI Commands on page 33

■Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard Slot on page 32

■SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High Memory and PoE Version) on page 10

Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard Slot

TIP: Placing the SRX210 Services Gateway on a flat, level surface, with the Juniper Networks logo facing up, will make it easier to align and insert the 3G ExpressCard in the ExpressCard slot.

CAUTION: The SRX210 Services Gateway does not support hot insertion and removal of the 3G ExpressCard.

To install the 3G ExpressCard in the ExpressCard slot on the SRX210 Services

Gateway:

1.Align the 3G ExpressCard as follows:

■Ensure that the 3G ExpressCard is parallel with the surface on which the SRX210 Services Gateway is placed.

■Ensure that the center of the 3G ExpressCard is aligned with the center of the ExpressCard slot on the SRX210 Services Gateway.

2.Study Figure 14 on page 33, which shows installation of the 3G ExpressCard on the SRX210 Services Gateway.

32■ Installing the 3G ExpressCard in the SRX210 Services Gateway ExpressCard Slot

Page 51 Page 53
Page 52
Image 52
Juniper Networks SRX 210 3G ExpressCard Physical Specifications continued, Voltage supply, 3.3V, primary source, 1.5V
Page 51 Page 53