E-22
ON-SCREEN DISPLAY
Status display (continued)
3DV 2K CH–1 / 2 SP 20
min
W
ARNING 7001
DRUM MOTOR FA I LURE
REC INH I B I T
06/10 / 05 STANDBY
-
OFF
11:20:00 TCR 02:00:00:00
23
4
5
No. Item Description
2Date/time
Memo
If the display position of the
counter is set to the lower left,
this item will be displayed on
the lower right.
It displays the date and time (HR:MM:SS).
When the unit is in the Analog/HDV Signal RECORDING
or STOP mode, it displays the data of the built-in clock.
During playback, fast-forwarding or rewinding, the data
recorded on the tape is displayed.
During DV signal recording, the data from the IEEE1394
terminal is displayed. If the REC button is pressed in the
STOP mode, the input data from the IEEE1394 terminal
will be displayed.
The style for displaying the date and time can be selected
with DATE STYLE and TIME STYLE in the DISPLAY Menu
screen.
When TIME STYLE is set to 12H, the display symbols of
the hours, minutes, and days change as follows for AM
and PM.
AM = dot (.) PM = colon (:)
Whether to display date/time and the type of display can
be selected with TIME/DATE in the DISPLAY Menu
screen.
When the data/time is not set or when a tape is played with
no date/time data recorded, “– –” will be displayed.