E-38
PREPARATION
Setting/Displaying date and time
This function sets up the date and time of the built-in clock. With the built-in chargeable battery, the date
and time data that have been set are maintained even after the main power is turned off. The set date
and time data are displayed on the monitor according to the settings in the Menu screen. Date and time
display information are recorded onto the tape. During IEEE1394 terminal DV signal input, internal
clock data is not recorded.
The date and time are set up at the CLOCK ADJUST Menu
screen.
The CLOCK ADJUST Menu screen is found under the TC/UB/
CLOCK [2/2] Menu.
Setting can be performed while checking the information shown on
the monitor.

Press the OPERATE button to turn on the power and

set it to the STOP mode.

1.Press the MENU button to display the TOP Menu screen.
2.Displaying the CLOCK ADJUST Menu.
1Press the R or P button to bring the cursor to the desired
TC/UB/CLOCK item. Press SET or the S button.
2Press the R or P button to bring the cursor to the NEXT
PAGE item in the TC/UB/CLOCK [1/2] Menu screen. Press
SET or the S button.
3Press the R or P button to bring the cursor to the CLOCK
ADJUST item in the TC/UB/CLOCK [2/2] Menu screen.
Press SET or the S button.
3.Setting the date and time in the CLOCK ADJUST Menu
screen.
1Press the R or P button to bring the cursor to the date or
time item. Press SET or the S button.
2Press the S or Q button to select the digit for setting.
The selected digit starts blinking.
3Press the R or P to set the value.
4Repeat step 1 – 3. After completing the required setting,
press the SET button.
Setting date and time
MENU button
R button S button
P button
Q button
OPERATE button
SET button
–––TC/UB/CLOCK[2/ 2 ] –––
U-BIT[50] OFF
CLOCK ADJUST. .
PAGE BACK
–––CLO
M
CK ADJUST – – –
D(DMD/ATE /YY) 06/ 10 /05
TIME 00:00
PAGE BACK
–––CLO
M
CK ADJUST – – –
D(DMD/ATE /YY) 06/ 10 /05
TIME 12:00
PAGE BACK
TC/UB/CLOCK [2/2] Menu screen
CLOCK ADJUST Menu screen
Date (MM/DD/YY)...U model
Date (DD/MM/YY)...E model
Time (Hour, minute)
Cursor