E-61
BR-HD50 is equipped with a time code reader. When it enters the RECORD mode from the RECORD-
ING PAUSE mode, it reads the time code data already recorded on the tape and continues recording
time code from that value. (Regeneration)

Set the TC/UB/CLOCK [1/2] Menu as follows.

TCG SELECT :REGEN
NDF/DF [60] : No setting required. The framing mode will
match the tape. (U model only)
1.Insert a tape with time codes recorded.
2.Set BR-HD50 to the RECORDING PAUSE mode at the posi-
tion where time codes are to be recorded again.
3.Press the PLAY button to go to the RECORDING mode.
Time codes will be recorded on the tape, starting from where
it stopped at last recording.
The counter mode display shows either TCR or UBR.

Set the INPUT SELECT switch on the front panel to

HDV/DV.

Set TC DUPLI.: DV in the TC/UB/CLOCK [1/2] Menu

screen to AUTO.

* To record the time code from a BR-DV600 or GY-DV500 in
non-drop frame mode, set TC DUPLI.: DV to NON DROP. (U
model only)
1.Check the time code of the IEEE 1394 terminal.
Press the REC button when BR-HD50 is in the STOP mode to
display the time code on the monitor. It will be displayed while
the button is held down.
The counter mode display shows DTCG or DUBG.
2.Select the RECORDING mode.
Record time codes from the IEEE1394 terminal.
Memo
For date/time also, data from the IEEE1394 terminal are recorded.
Recording time code following the one last recorded on the tape
Setting
Operation
Recording time code, input to the IEEE1394 terminal (In DV mode only)
Setting
Operation
KCABEGAP
EGAPTXEN
FFOTESFFOCT
NO
FFOVD:.ILPUDCT
]05[TIBFD
PORD]06[FD/FDN
NEGERTCELESGCT
–––2/1[]KCOLC/BU/CT––
–
TC/UB/CLOCK [1/2] Menu screen
KCABEGAP
EGAPTXEN
FFOTESFFOCT
O
NO
TUAVD:.ILPUDCT
]05[TIBFD
PORD]06[FD/FDN
TESERPTCELESGCT
–––2/1[]KCOLC/BU/CT––
–
TC/UB/CLOCK [1/2] Menu screen