RECORDING
Adjusting audio recording level
The analog audio recording level can be adjusted on this unit. There are two adjustment methods, selected using A.REC VR.MD.: DV in the AUDIO Menu screen.
The audio recording level can be set to the initial setting value. (UNITY mode)
Memo
Audio input level from the IEEE1394 terminal cannot be adjusted.
Settings
Set “Q, S” KEY FUNC. in the SYSTEM [1/2] Menu screen to VAR/RECV.
Select an adjustment method using A.REC VR.MD.: DV in the AUDIO Menu screen.
BOTH | : The audio recording level for both CH1 and CH2 are adjusted simultaneously. |
INDEPEND | : The audio recording level for CH1 and CH2 are adjusted separately. |
Adjusting audio recording level
Adjustment buttons | Audio level indicator |
Hide the Menu screen.
This can be adjusted in the STOP or REC mode. Watching the audio level indicator on the front panel, adjust so that the far right LED is turned off.
Simultaneously adjusting both channels (BOTH)
Increasing the recording level
Press the R button while holding down the Q or S button. The audio recording level for both CH1 and CH2 increases.
Decreasing the recording level
Press the P button while holding down the Q or S button. The audio recording level for CH1 and CH2 decreases.
