JVC BR-HD50E Edit, Control with RS-422A Analog signals, „ Remote 2/2 Menu screen

EDIT

Using a non-linear editing system

Tape contents of BR-HD50 are captured by a non-linear editing system and the non-linear edited con- tents are recorded on BR-HD50.

Connection
Analog video
VIDEO OUT	Analog audio
	AUDIO OUT
	RS-422A
	REMOTE

IEEE1394 terminal	Non-linear system
	IEEE1394 (image, audio, control)

Control with RS-422A (Analog signals)

Setting

„Set the REMOTE/LOCAL switch on the front panel to REMOTE.

„REMOTE [1/2] Menu screen

• Set REMOTE SEL 9-PIN to “ON”.

„REMOTE [2/2] Menu screen

zREMOTE FF/REW MODE:

Use this item to select the operation to be per- formed if the FF or REW command is received during playback. (FF/REW or Search)

If the search operation is not performed prop- erly, set it to “SEARCH”.

zCONTROLLER TYPE (in the REMOTE [2/2] Menu screen):

Set this item to “TYPE1”.

Control with the IEEE1394 ter- minal (Digital signals)

Setting

„Set the INPUT SELECT switch located on the front panel to HDV/DV.

„Set the IEEE1394 switch located on the front panel to match the video for- mat.

•Set to DV position for DV mode, and to HDV position for HDV mode.

„Set the REMOTE/LOCAL switch on the front panel to the position matching the REMOTE menu below.

„REMOTE [1/2] Menu screen

•Set REM SEL HDV/DV to ON or LOC+REM. Set this item to ON if it is to become enabled only when the REMOTE/LOCAL switch on the front panel is set to REMOTE. Set this item to LOC+REM if it is to become enabled regardless of the position of the REMOTE/LOCAL switch.

Memo

zIf the time code of BR-HD50 is not displayed correctly when the non-linear side moves one frame forward or backward, set the STL/F.ADV: DV in the SYSTEM [1/2] Menu screen to “FRAME.” (In DV mode only)

zWhen controlling with RS-422A using the HDV format, only the capture operation is supported.

E-63