E-28
CONNECTION
Connecting audio signals
Input signal
zAnalog input
AUDIO IN terminal (RCA×2)
Connect an audio cable.
There are analog input terminals for 2 chan-
nels.
Four channels cannot be recorded simulta-
neously. Audio input from each terminal is
recorded to CH1 and CH2.
zDigital input
IEEE1394 terminal (6P)
Connect an IEEE1394 (6PIN) cable.
Inputs HDV signals or DV signals.
Digital audio signals are input with the video.
• The DV signal audio mode (48 kHz or 32
kHz) will match the input signal audio mode.
• During digital signal input, the recording
level cannot be adjusted.
Output signal
zAUDIO OUT terminal (RCA×2)
Connect an audio cable.
Analog audio is output.
For the DV format, tracks are available for 4
channels (in the 32 kHz audio mode).
• In the 32 kHz audio mode, the audio chan-
nel to output can be selected from 4 chan-
nels using A.OUTPUT: DV in the AUDIO
Menu screen.
zPHONES terminal (Stereo ø3.5)
Connect headphones.
zIEEE1394 terminal (6P)
This is also an input terminal. Connect an
IEEE1394 (6PIN) cable.
Digital audio signals are output with the video.
IEEE1394 AUDIO
OUT
AUDIO IN
HDMI OUT
Audio output, e.g., VCR/Camera
Digital audio
HDV/DV
Analog audio
HD monitor
Digital audio
HDV/DV
Audio input, e.g., VCR
Monitor
Analog audio
Analog audio
input
output
Digital audio
Headphones
• Attach the supplied filter to the IEEE1394
cable. (XPage29)
• For more information on the IEEE1394 termi-
nal, refer to page 18.