E-60
TIME CODE
Recording the time code
Time codes can be recorded with the following ways. Whether to record user’s bit can be selected with
U-BIT in the TC/UB/CLOCK [2/2] Menu screen. (Only for E model)
zRecord it from preset data.
zRecord it following the one last recorded on the tape.
zRecord the time code, which is input to the IEEE1394 terminal. (In DV mode only)
Record preset time code data to the internal time code generator in the TIME CODE Preset screen.

Set the TC/UB/CLOCK [1/2] Menu as follows.

TCG SELECT :PRESET
The time code advance mode is REC-RUN mode.
NDF/DF [60] : NON DROP or DROP (U model only)
1.Check the preset time code.
1Set the COUNTER switch to TC or UB.
2In the STOP mode, hold down the REC button.
The preset time code or the user’s bit is displayed on the
monitor. The counter mode is displayed as TCG or UBG.
3When the REC button is released, it returns to the origi-
nal display.
2.Record.
Press the PLAY button while holding down the REC button.
The time code and user’s bit are recorded.
To stop recording, press the STOP button.
Recording from preset data
Setting
Operation
Preset time code
Stopping the power supply to the DV IN terminal of BR-HD50 can-
cels the preset value of the time code generator.
KCABEGAP
EGAPTXEN
FFOTESFFOCT
NO
FFOVD:.ILPUDCT
]05[TIBFD
PORD]06[FD/FDN
TESERPTCELESGCT
–––2/1[]KCOLC/BU/CT––
–
TC/UB/CLOCK [1/2] Menu screen
REC button
COUNTER switch