PLAYBACK
Repeat playback
Three types of repeat playback are available for
The repeat playback function can be set with REPEAT MODE in the SYSTEM [1/2] Menu screen.
Setting
REPEAT MODE in the SYSTEM [1/2] Menu screen
OFF : No repeat playback.
INDEX : Repeat playback between positions where index signals are recorded.
V. END : Repeat playback from the beginning of the tape to the position where recording of video signals ends.
TAPE END : Repeat playback from the beginning to the end of the tape.
Operation
1.Press the REW button to rewind the tape to the beginning.
2.Press the PLAY button to start playback.
When it reaches the position set at REPEAT MODE, the tape starts rewinding and plays back again.
To abort the repeat playback function, press the STOP button.
Repeat operation
| TAPE END |
| V. END |
INDEX | Playback |
Rewind | |
Index signal | Index signal |
Beginning of tape | End of tape |
SYSTEM [1/2] Menu screen
| – – – S Y S T E M [ 1 / 2 ] – – – | |
S T L / F . A D V : D V | 2 N D | |
B A C K U P R E C : D V | O F F | |
L O N G P A U S E T I M E | 3 0 S E C | |
R E C L O N G P . T I M E | 5 M I N | |
L O N G P A U S E M O D E | S T B Y - O F F | |
“ , ” K E Y F U N C . | V A R / R E C V | |
R E P E A T M O D E | I N D E X | |
N E X T | P A G E |
|
P A G E | B A C K |
|
|
|
|
INDEX repeat playback
zIf no index signal is detected during playback, the tape will run until the end. If no index signal is detected during rewind, the tape will rewind until the beginning.
zIf the interval between index signals is less than one minute, the function may not work well.
