JVC BR-HD50E Selecting date/time display, On-screen status display

E-39
Memo
The seconds for the time cannot be set up. After the minute is set
up, press the SET button in synchronization with the time signal.
4.Returning to the TOP Menu from TC/UB/CLOCK after com-
pleting all settings
• Press the Q button.
Or
• Press the R or P button to bring the cursor to PAGE
BACK and press the SET button.
5.Returning to the usual menu
• Press the MENU button.
Or
• Bring the cursor to EXIT of the TOP Menu and press the SET
button.
The date and time data can be displayed on the monitor on-screen display (status display). Setup can
be performed at the DISPLAY Menu screen to turn on/off the date/time display and select the display
style. (For setting procedure: XPage64)
DISPLAY Menu screen
zTIME/DATE : For enabling/disabling the display of date
and time on the status display
OFF : Does not display date/time.
TIME : Displays time only.
DATE : Displays date only.
DATE+ TM : Displays both the time and date.
zDATE STYLE : For selecting the date display style
YY/MM/DD : Year/month/day
MM/DD/YY : Month/day/year
DD/MM/YY : day/month/year
zTIME STYLE :For selecting the time display style
24H : 24-hour time mode
12H : 12-hour time mode
Set DISPLAY to ON or AUTO in the DISPLAY Menu screen.
Memo
z In the Analog RECORDING or STOP mode : Displays the time of
the built-in clock.
zIn the PLAYBACK mode : The date and time
recorded on the
tape are displayed.
zIn the DV RECORDING mode : The date and time
from the IEEE1394
terminal are dis-
played.
Selecting date/time display
On-screen status display
–––CLO
M
CK ADJUST–––
D(DMD/ATE /YY) 06/ 10 /05
TIME 12:00
PAGE BACK
–––DISPLAY–––
T
DISPLAY ON
COUNTER POSI . LOWER-R
IME CODE ON
VTR MODE ON
TAPE REMAI N ON
TIME/DATE DATE+TM
A/V INFO. ON
DATE STYLE DD/ MM/YY
TIMESTYLE 24HOUR
PAGE BACK
DISPLAY Menu screen
3DV 2K CH–1/ 2 SP 00MI N
06/ 10 / 05 NO CASSETTE
11:20:00 TCR 02:00:00:0
0
On-screen status display
Date/time display