JVC BR-HD50E 5COMPONENT OUT Component sig- nal output terminal BNC×3, 6CH1 Audio in terminal RCA

5[COMPONENT OUT] Component sig- nal output terminal (BNC×3)

Output terminal for component video signals (Y/PB/PR). Outputs analog HD/SD video. Con- nect this to an HD-compatible monitor with a COMPONENT IN terminal.

•The video format to output from this termi- nal can be selected using OUT FORMAT [60]/[50] in the VIDEO Menu screen. (XPage 73, 74)

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

6[CH1 AUDIO IN] terminal (RCA)

Use this terminal to input analog audio signals. To enable audio input via this terminal, set the INPUT SELECT switch located on the front panel to “LINE” or “Y/C”.

Analog signals are recorded on CH1.

7[CH2 AUDIO IN] terminal (RCA)

Use this terminal to input analog audio signals. To enable audio input via this terminal, set the INPUT SELECT switch located on the front panel to “LINE” or “Y/C”.

Analog signals are recorded on CH2.

8[CH1/3 AUDIO OUT] terminal (RCA)

Use this terminal to output analog audio sig- nals.

•In the 48 kHz audio mode, it outputs the sound of CH1.

•The output audio channel during playback of tapes recorded in 32 kHz audio mode, or the EE audio channel during DV signal input in 32 kHz audio mode, can be selected using A.OUTPUT: DV in the AUDIO Menu screen. (XPage 72)

9[CH2/4 AUDIO OUT] terminal (RCA)

Use this terminal to output analog audio sig- nals.

•In the 48 kHz audio mode, it outputs the sound of CH2.

•The output audio channel during playback of tapes recorded in 32 kHz audio mode, or the EE audio channel during DV signal input in 32 kHz audio mode, can be selected using A.OUTPUT: DV in the AUDIO Menu screen. (XPage 72)

0[HDMI OUT] HDMI signal output termi- nal

Outputs HDMI signals. (HDMI : High Definition Multimedia Interface)

Outputs digital HD/SD video and digital audio. This is connected to a monitor with an HDMI terminal.

•The video format to output from this termi- nal can be selected using OUT FORMAT [60]/[50] and MONITOR SELECT in the VIDEO Menu screen. (XPage 73, 74)

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

Memo

zVideo is not displayed when the connected monitor does not support the video format selected using OUT FORMAT [60]/[50] in the VIDEO Menu screen.

If this occurs, set MONITOR SELECT to HDMI[A].

zIf the monitor has a DVI-D terminal that sup- ports HDCP, you can watch digital video by connecting an HDMI↔DVI-D cable.

zWhen the video format of the IEEE1394 input signal differs from the IEEE1394 switch, or INPUT SELECT switch is set to HDV/DV and a signal is not input into the IEEE1394 terminal, no signal is output from the HDMI OUT termi- nal. ("no 1394" is displayed on the counter dis- play.) Similarly, no signal is output from the HDMI OUT terminal when a blank cassette tape is played. ("-------" is displayed on the counter display.)

E-17