E-56
PLAYBACK
Multi cue-up
Using the time codes recorded on the tape, up to 5 points on the tape can be registered as cue-up
points at the Multi Cue-up screen. The registered tape positions (cue-up points) can be searched.
1.Set the COUNTER switch to TC.
2.Load a tape with time codes recorded.
3.Press the CUE UP button.
The MULTI CUE UP screen appears on the monitor.
4.Perform playback or search. At the position to b e regis-
tered, set it to the STILL or STOP mode.
5.Press the R or P button to bring the cursor to the cue-
up point. Press the SET button.
Register the time code data of the current position as a cue-
up point.
• If no tape is loaded, “00” is registered.
• Cue-up points can be registered while the tape is being
played back.

6.To register more cue-up points, repeat steps 4 and 5. Up to

5 cue-up points can be registered.
Press the R or P button to bring the cursor to the cue-up point
to be cleared. Press the RESET button.
After a cue-up point is cleared, “– –” is displayed.
Registering cue-up pointsClearing registered cue-up points
COUNTER swicth
R button RESET button
CUE UP buttonP button
SET button
–––MULTI CUEUP––––––
CUEI 00:01:35:11
CUE2 03:42:59:21
CUE3 ––:––:––:––
CUE4 11:21:48:07
CUE5 ––:––:––:––
EXIT
“SET” :ENTRY CUE DATA
“RESET” : CL EAR CUE DATA
“CUE UP ” :EXECUTE CUE UP
MULTI CUE UP screen
Memo
For details on time code setting
and recording:
(XPage58)
Cursor
Cue-up point