Settings Detailed and Display Menu

Media RemainFor setting whether to display the remaining space of the recording SD card.[Setting Values: ROn, Off] Memo :

0When the remaining space warning is displayed, the information appears even when “Off” is selected.

0The displayed time is an estimate.TC/UB

For specifying whether to display the time code (TC) or user’s bit (UB) rate in the display on the LCD monitor and viewfinder screen.

[Setting Values: UB, RTC, Off]Audio Meter

For specifying whether to display the audio level meter in the display on the LCD monitor and viewfinder screen.

[Setting Values: ROn, Off]

Battery

For setting the display of the remaining battery power in the display on the LCD monitor and viewfinder screen.

The battery information appears only on the Display 1 screen in Camera mode.(A P112 [Display 1 screen] )0Time:Displays the remaining battery power in minutes. (min)0Capacity%:Displays the remaining battery power in percentage. (%)0Voltage:Displays the current battery voltage in units of 0.1 V. (V)0[Off]:

The remaining battery power is not displayed. [Setting Values: RTime, Capacity%, Voltage, Off]

Memo :

0The battery mark that appears before the “Time”, “Capacity%” or “Voltage” value changes according to the remaining battery power.

4 : 10 % and belowD : 11 % to 30 %C : 31% to 70 %B : 71 % to 100 %

0When the remaining battery power is low, “RES” instead of the value is displayed.

Replace the battery as soon as possible.

0The remaining battery power and remaining time are intended as reference values for the shooting duration.

Date/Time

For specifying whether to display the date and time in the display on the LCD monitor and viewfinder screen.

[Setting Values: ROn, Off]

Date Style

For setting the date display sequence for display on the LCD monitor and viewfinder screen as well as for time stamp recording.

Display examples of the setting values are as follows.0 DMY2: 30 Jun 20120 DMY1: 30-06-20120 MDY2: Jun 30, 20120 MDY1: 06-30-20120 YMD: 2012-06-30[Setting Values: DMY2, DMY1, MDY1, MDY2, YMD](Default values: MDY2 (U model), DMY1 (E model))Time Style

For setting the time display for display on the LCD monitor and viewfinder screen as well as for time stamp recording.

[Setting Values: 24hour, 12hour](Default values: 12hour (U model), 24hour (E model))

Shutter

For setting the shutter display to be displayed on the LCD monitor and viewfinder screen.

0 DEG:Displays the shutter speed in degrees in the same way as film cameras.0 SEC:Displays the shutter speed in seconds. [Setting Values: DEG, RSEC]

Memo :

0“DEG” is selectable only when [Frame & Bit Rate] is set to “24p(HQ)” or “25p(HQ)”.

When [Frame & Bit Rate] is set to other values, the shutter display setting is fixed at “SEC” and cannot be selected.

(A P106 [ Frame & Bit Rate ] )

100