JVC GY-HM600E, GY-HM600U manual 74

Shooting

Press [REC]		Press [REC]		Press [REC]
(Recording starts)		(Recording resumes)		(Recording resumes)
	Press [REC]		Press [REC]		Press and hold [REC]
	(Recording pauses)		(Recording pauses)		(Recording stops)
	Recording 1		Recording 2		Recording 3

Completed Clip (Recorded video and audio)

Recording 1Recording 2Recording 3

.

1Set “Rec Mode” to “Clip Continuous”. (A P106 [ Rec Mode ] )

0 Set [Main Menu] B [System] B [Record Set] B [Rec Mode] to “Clip Continuous”.

0 The display changes (“STBY” B “STBYC”).

2 Start recording. (Recording 1)

0 Press the [REC] button to start recording in

	Clip Continuous mode.
0	The display changes (“STBYC” B
	“RRECC”) and the card slot status indicator
	lights up in red.
3 Pause recording.
0	Press the [REC] button again to pause
	recording. The display changes (“RRECC”
	B “STBYC” (yellow text)).
0	The card slot status indicator remains lighted
	in red.

Memo :

0When the [CANCEL] button is pressed while the camera recorder is paused (STBYC), the display changes (“STBYC” (yellow text) B “STBYC” (blinking yellow text) B “STBYC” (white text)). A “clip” is generated. The card slot status indicator lights up in green.

4 Resume recording. (Recording 2)

0 Press the [REC] button again to resume

recording. The display changes (“STBYC” (yellow text) B “RRECC”).

0 The card slot status indicator remains lighted in red.

5 Pause recording.
0	Press the [REC] button again to pause
	recording. The display changes (“RRECC”
	B “STBYC” (yellow text)).
0	The card slot status indicator remains lighted
	in red.

6 Resume recording. (Recording 3)

0 Press the [REC] button again to resume

recording. The display changes (“STBYC” (yellow text) B “RRECC”).

0 The card slot status indicator remains lighted in red.

7Press and hold the [REC] button.

0Recording stops and the display changes (“RRECC” B “STBYC”). A “clip” is generated.

0The card slot status indicator lights up in green.

8Press the [REC] button again.

0The display changes (“STBYC” B

“RRECC”) and the card slot status indicator lights up in red.

0A new “clip” is generated from here.

Memo :

0The following operations cannot be performed while recording is paused (STBYC, yellow text). 0 Clip Review operation

(A P68 [Viewing Recorded Videos Immediately (Clip Review)] )

0 Switching SD card slots

0 Switching operation mode (A P16 [Operation Modes] )

0Files are split into sizes of 4 GB (or 30 minutes) regardless of the menu settings.

Caution :

0Do not remove the SD card during recording (RRECC, red text) or recording pause (STBYC, yellow text).

0To remove the SD card in the “Clip Continuous” mode, press the [CANCEL] button, check that “STBYC” (white text) is displayed and the card slot status indicator is lighted in green before you remove the card.

0When the SD card becomes full during recording, recording stops and “STOP” is displayed.

0When the [POWER ON/OFF(CHG)] switch is turned off during recording or recording pause, recording stops and power is cut off after a clip is generated.

74