JVC GY-HM600E, GY-HM600U button, Memo :, Cursor, Memo :, Memo :, “Regen”, Shooting, Caution :, During drop frame, to the normal screen, During non-dropframe

Setting Time Code without Opening the Menu

4 Check the values and press the Set button (R).
0	The time code is set and the screen returns
	to the normal screen.
0	To cancel the setting, press the [CANCEL]
	button.

MENU/THUMB

CANCEL

.

MENU/THUMB

CANCEL

AE LEVEL

FOCUS ASSIST/1 OIS / 2

TIME CODE

Caution :

0When the camera recorder is switched to Media mode during editing, editing will be canceled and the screen will close.

0When editing time code, operations of the [FOCUS ASSIST/1], [OIS/2] buttons that are set in the [Main Menu] B[Camera Function] B[User Switch Set] menu are disabled. [OIS/2] functions as the number reset button.

(A P91 [User Switch Set Item] )

Shooting

Memo :

0Settings cannot be made in the following cases. 0 [TC/UB] B [TC Generator] has been set to

“Regen”.0 Menu screen is displayed.0 The camera recorder is not in the Camera mode.

Setting Time Code

1Set [TC/UB] B [TC Generator] to settings other than “Regen”.

(A P96 [ TC Generator ] )

2Hold down the [MENU] button and press the [FOCUS ASSIST/1] button.The [TC Preset] setting screen appears.

Cursor

During drop frame

During non-drop frame

.

3Set the time code (hour, minute, second, frame).

Use the cross-shaped button (HI) to place the cursor at the item to set, then use the cross- shaped button (JK) to change the values.

Memo :

0Press the [OIS/2] button to reset each digit to “0”. The cursor moves to the time digit (left).

Recording Time Code in Continuation of the Recorded Time Code on SD CardThis camera recorder is equipped with the time code reader.

1Set [TC/UB] B [TC Generator] to “Regen”. 0 When the camera recorder enters from

recording standby mode to recording mode, it reads the time code already recorded on the SD card and records the new time code in continuation of that value.

0 The same data as the user’s bit already recorded on the SD card is recorded.

Memo :

0When [TC/UB] B [TC Generator] is set to “Regen”, the framing mode of the time code follows the settings in [Drop Frame] of the [TC/UB] menu instead of the clip settings. (A P97 [ Drop Frame ] )

63