JVC GY-HM600E, GY-HM600U green, Memo :, Shooting, Caution :, Frame Rec, Caution :, 3 Start recording, Frames] and pause, frames is recorded, 4 Repeat Frame Rec, (A P105 [ Format ] )

Caution :

0If the power is cut off due to low battery power, a proper clip may not be generated.

0When [Format] in the [Main Menu] B [System] B [Record Set] B [Record Format] menu is set to “AVCHD”, Clip Continuous Rec cannot be performed.

(A P105 [ Format ] )

Frame Rec

In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one “clip” on the SD card.

In this mode, recording starts with every press of the [REC] button, and only the specified number of

frames is recorded.The recording can be written to the media as a single clip until it is stopped.

Memo :

0Audio will not be recorded.

0Until a specified amount of recordings is accumulated, the file cannot be written to the media.

0If the specified amount is not reached when recording is stopped, normal recording is performed and frames are added to the ending of the clip until the amount is reached. (Padding)

0After the specified number of frames is recorded and written to the media, recording will be performed until the same number is accumulated again.

Press [REC]						Press and hold [REC]
(Frame Rec starts)						(Frame Rec stops)
		Press [REC]		Press [REC]
		Recording resumes		Recording resumes
							Normal	recording
	Pause		Pause		Pause		(Padding data)

Records number of frames specified in [Rec Frames]

Actual clips recorded to the media

.Specific amount of data

1Set [Rec Mode] to “Frame Rec”.0Set [Main Menu] B [System] B [Record Set] B [Rec Mode] to “Frame Rec”.

(A P106 [ Rec Mode ] )

0The display changes (“STBY” B “STBYM”).2Set the number of frames to record in [Rec Frames].0 Set using [Main Menu] B [System] B [Record Set] B[Rec Mode] B[Rec Frames].(A P106 [ Rec Frames ] )

3 Start recording.
0	Press the [REC] button to record only the
	number of frames specified in [Rec
	Frames] and pause.
0	The display changes (“STBYM” B “RRECM”
	B “STBYM” (yellow text)).
0	The card slot status indicator lights up in
	green.

4 Repeat Frame Rec.

0 Press the [REC] button again to record only the number of frames specified in [Rec Frames] and pause.

0 The display changes (“STBYM” B “RRECM” B “STBYM” (yellow text)).0 Frame Rec continues until the recording is stopped (step 5).5Press and hold the [REC] button.

0The card slot status indicator lights up in green.

Caution :

0Do not remove the SD card during recording (“RRECM”, red text) or recording pause (“STBYM”, yellow text).

0To remove the SD card during Frame Rec, press the [CANCEL] button, check that “STBYM” (white text) is displayed and the card slot status indicator is lighted in green before you remove the card.

0When [Main Menu] B [TC/UB] B [TC Generator] is set to “Free Run” or “Free Run(Ext)”, the time code will be recorded in “Rec Run”.

0Audio cannot be recorded. A x mark appears in the audio level meter display.(A P113 [Audio Level Meter] )

Shooting

75