JVC GY-HM600E, GY-HM600U Monitoring Audio Sound, During Recording Using a, Headphone, “BOTH”

Monitoring Audio Sound

During Recording Using a

Headphone

You can check the recorded audio using headphone.

1

2 3

MONITOR

CH1

BOTH

CH2

.

1Connect the headphone.

2Select the channel to monitor with the [MONITOR] selection switch.

Setting	Description
[CH1]	Outputs the audio recorded in [CH1].
[BOTH]	Outputs the audio recorded in
	[CH1/CH2].
[CH2]	Outputs the audio recorded in [CH2].

3Use the [MONITOR +/-] button to adjust the monitor volume.

Memo :

0Audio during recording is not output from the monitor speaker.

0Warning tone is output when there is an abnormality in the camera recorder or when the battery is low.

(A P130 [Warning Tone] )

Selecting Audio Output Method When the [MONITOR] Selection Switch Is Set to

“BOTH”

When a stereo type earphone jack is connected, perform the following setting to output stereo sound.

1Set the [MONITOR] selection switch to “BOTH”.

2Set [Main Menu] B [A/V Set] B [Audio Set] B [Monitor] to “Stereo”.

(A P103 [ Monitor ] )

Memo :

0You can set the volume of the warning tone in [Main Menu] B[A/V Set] B[Audio Set] B[Alarm Level]. (“Off”/“Low”/“Middle”/“High”)

(A P103 [ Alarm Level ] )

Shooting

59