JVC GY-HM600E, GY-HM600U Splitting the Clips Freely (Clip Cutter Trig), CUT, CLIP, Viewing Recorded Videos, Immediately (Clip Review), Memo :, Memo :, buttons, Caution :, on the screen

	Viewing Recorded Videos
	Immediately (Clip Review)
	You can check (review) the last recorded video clip
	on the screen.
	However, the video clip cannot be played back if
	the settings of the camera recorder are different
	from the video format (Resolution/Frame & Bit
	Rate/SD Aspect) of the clip.
	(A P105 [ Resolution ] )
	(A P106 [ Frame & Bit Rate ] )
	(A P106 [ SD Aspect ] )
Shooting	Memo :
	0 To use this function, assign “Clip Review” to any

of the user buttons. “Clip Review” is assigned to [C.REVIEW/7] button in factory default.

0 “Clip Review” can also be assigned to other userbuttons.

(A P36 [Assigning Functions to User Buttons] )

C.REVIEW/7

Caution :

0During Clip Review, only the [CANCEL] and [REC] buttons are enabled.

Press the [CANCEL] button to cancel clip review and return to “STBY” (recording standby) mode. Press the [REC] button to cancel clip review and enter recording mode. It will take some time to start recording after the button is pressed.

0When the last clip is less than 5 seconds, the whole clip is played back.0Only video clips in the currently selected slot can be reviewed.

0When there are no clips in the selected slot, Clip Review function is disabled.

0Clip Review is unavailable when Clip Continuous Rec is paused (“STBYC”, yellow text). To operate Clip Review, use the [CANCEL] button to set to “STBYC” (white text) first.

(A P73 [Clip Continuous Rec] )

0Clip Review is unavailable when the camera recorder is connected to an external equipment and the equipment is in recording state.

.

BATT.RELEASE

A POWER /CHG

DEVICE

AV B HDMI

REMOTE

DC

HD/SD SDI

INPUT1

INPUT2

REC

Splitting the Clips Freely (Clip Cutter Trig)

You can split the clips freely without having to stop recording during shooting.

1 Assign the “Clip Cutter Trig” function to any of

1Press the button assigned with the “Clip Review” function during standby (“STBY” is displayed).

Playback of the configured section starts.

Memo :

0The video clip is played back according to the setting in [Main Menu] B [Camera Function] B [User Switch Set] B [Clip Review]. By default setting (Last 5sec), the last 5 seconds of the clip is played back.

(A P91 [ Clip Review ] )

0When playback is complete, the camera recorder exits Clip Review and returns to “STBY” (recording standby) mode.

the user buttons.

(A P36 [Assigning Functions to User Buttons] )

2Press the user button that is assigned with “Clip Cutter Trig” during shooting.

[CLIP CUT] appears on the display screen and the clip is split.

100min				REC	00:00:00.00
50min					Jan 24,2012
					12 :34 :56			CUT
				CLIP CUT	CLIP
							5 . 6f t
						ND 1 /64
							AE+6
							0dB
4030	20	10	0				F1.6
					P13000K	1/ 100

.

68