Settings and Adjustments Before Use

.

Adjusting the Grip Belt

Open the pad and adjust the position of the grip belt accordingly.

Attaching the Tripod

Use the screw hole at the bottom of this camera recorder.

(3/8×16UNC, 1/4×20UNC)

Use the screw hole that suits the tripod.

To prevent the camera recorder from falling off, which may result in injuries or damages, read the instruction manual of the tripod to be used and make sure that it is securely attached.

BATT.RELEASE

A

P/COWHGER

DEVICE

 

AV

HD/SD

B

SDI

HDMI

 

R

 

EMOTE

 

DC

 

.

INPUT1

INPUT2

REC

Preparations

oBottom

Caution :

0If the grip is loose, the camera recorder may fall off resulting in injuries or malfunction.

Attaching an External Microphone

You can attach a separately sold microphone to the microphone holder.

1, 3 2

4 5

.

1 Turn the knob on the microphone holder

anticlockwise to loosen and open the microphone holder.

2Place the microphone in the microphone holder.

3Turn the knob on the microphone holder clockwise to secure the microphone.

4Connect the microphone cable to the [INPUT1] or [INPUT2] terminal.

5Pin the microphone cable to the clamp.

6Perform the settings for the microphone correctly.

(A P57 [Audio Recording] )

.

Caution :

0Use the tripod on a stable surface.

0To prevent the camera recorder from falling, attach securely using the rotation prevention hole.

0Use screws with screw length 5 mm and below.

Attaching the Large Eyecup

0Attach the large eyecup to prevent external light from entering the viewfinder screen and cameraman’s vision.

0Align and attach to the groove of the eyecup mounted on the camera recorder.

0The large eyecup can be attached in any direction.

Large Eyecup (supplied)

Eyecup

.

Memo :

0Do not remove the eyecup that is premounted on the camera recorder.

25