Color Gain

For adjusting the video signal color level. Increasing the value deepens the color. [Setting Values: -50 to +15, Off (R0)]

Memo :

0Images are displayed in black-and-white when this is set to “Off”.Reverse Picture

For recording images correctly by setting this item to “Rotate” when the lens image appears upside

down or laterally inverted.0 Rotate:Enables horizontal/vertical inversion of the image.

0 Off:

Disables horizontal/vertical inversion of the image.[Setting Values: Rotate, ROff]Reset ProcessRestores all items in the [Camera Process] menu to their default settings.Detail/Adjust ItemV/H Balance

For setting the H/V balance to enhance contour (detail) in the horizontal (H) or vertical (V) direction.

0 H+1 to H+4:Increasing the value enhances contour in the horizontal direction.0 V+1 to V+4:Increasing the value enhances contour in the vertical direction.[Setting Values: H+1 to H+4, RNormal, V+1 to V+4]

Memo :

0When [System] under [Record Format] is set to “SD”, this item is fixed at “Normal”.

H Frequency

For specifying the correction frequency of the horizontal contour. Set this according to the object.

0 High:

Emphasizes the high frequency range. Use this when shooting objects with fine patterns.

0 Middle:Emphasizes the intermediate frequency range.0 Low:

Emphasizes the low frequency range. Use this when shooting objects with large patterns.

[Setting Values: High, RMiddle, Low]

Memo :

0When [System] under [Record Format] is set to “SD”, this item is fixed at “Low”.

V Frequency

For specifying the correction frequency of the vertical contour. Set this according to the object.

0 Low:

Emphasizes the low frequency range.

0 Middle:

Emphasizes the intermediate frequency range.

0 High:

Emphasizes the high frequency range. [Setting Values: Low, RMiddle, High]

Memo :

0When [System] under [Record Format] is set to “SD”, this item is fixed at “Low”.

(A P105 [ Record Format ] )0“High” cannot be selected under the following settings.

0 When [Resolution] is set to “1920x1080”, and [Frame & Bit Rate] is set to “60i(HQ)” or “50i(HQ)”.

0 When [Resolution] is set to “1440x1080”, and [Frame & Bit Rate] is set to “60i(HQ)”, “50i(HQ)”, “60i(SP)” or “50i(SP)”.

Skin Detail

For turning On/Off the Skin Detail function, which is used to adjust the contour correction effect of the colors captured.

Select “On” to soften the detail at areas where skintone is detected.

[Setting Values: On, ROff]

9Level

For setting the level of contour correction (degree of softening) using the Skin Detail function. Decreasing the value increases the level of contour correction (degree of softening).

[Setting Values: -1, R -2, -3]9RangeFor adjusting the range of skin tone to trigger the Skin Detail function.Increasing the value increases the range. [Setting Values: -5 to +5 (R0)]

Settings Detailed and Display Menu

95