A/V Set Menu

Menu screen for video output and audio.Video Set...For specifying video output-related settings. (A P101 [Video Set Item] )Audio Set...For specifying audio-related settings. (A P102 [Audio Set Item] )Video Set ItemDisplay On TV

For setting whether to display the display and menu characters on the external monitor.

[Setting Values: On, ROff]

HDMI/SDI Out

For setting the terminal to output the video. [Setting Values: HDMI+SDI, SDI, HDMI, ROff]

9Resolution

For selecting the resolution of video output from the [HDMI]/[SDI] terminal according to the monitor to

be connected.[Setting Values: 576i, 576p, 480i, 480p, 720p, R1080i]

Memo :

0The selectable options vary according to the setting in [System]/[Resolution]/[Frame & Bit Rate] of [System] menu B [Record Set] B [Record Format].

0Cross conversion output is not possible.9HDMI Color0For setting the color format of HDMI signals.

0This item is selectable only when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.

[Setting Values: RGB, RAuto]9HDMI Enhance

0For setting the color range of HDMI signals. When connecting to a PC monitor, set this to “On”.

0This item is selectable only when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.

[Setting Values: On, ROff]

SD Aspect

For setting the style of displaying down-converted images on a 4:3 aspect ratio screen.

0 Side Cut:Displays image with the left and right sides cut off.0 Letter:Displays as a wide image with the top and bottom blackened.0 Squeeze:

Displays image that is squeezed horizontally. [Setting Values: Side Cut, Letter, RSqueeze]

Memo :

0When [System] in the [Record Format] menu is set to “SD” and [SD Aspect] is set to “4:3”, this item appears as “---” and cannot be selected.

(A P105 [ System ] )SD Set Up

For selecting whether to add a setup signal to the video signal output from the [AV] output terminal.

Setup signals are added when “7.5%” is selected.[Setting Values: 7.5%, 0.0%](Default values: 7.5% (U model), fixed at “0.0%” (E model))

Memo :

0Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal setting may be fixed at “0.0%”. “0.0%” is displayed in gray in this case.

Settings Detailed and Display Menu

101