Settings Detailed and Display Menu

VF Bright

For setting the brightness of the viewfinder screen. Increasing the value increases the brightness. [Setting Values: -10 to +10 (R 0)]

VF Contrast

For setting the difference in luminance between the darkest and brightness areas in the viewfinder screen.

Increasing the value increases the contrast. [Setting Values: -10 to +10 (R 0)]LCD Contrast

For setting the difference in luminance between the darkest and brightness areas in the LCD monitor. Increasing the value increases the contrast.

[Setting Values: -10 to +10 (R 0)]LCD BacklightFor setting the brightness of the LCD monitor backlight.[Setting Values: Bright, RNormal]LCD MirrorFor specifying the image display method when facing the LCD monitor.Select “Mirror” to display the image after laterallyinverting it. (Mirror display)

(A P34 [Adjusting the LCD Monitor and Viewfinder] )

[Setting Values: Mirror, RNormal]

Memo :

0The setting of this item is valid only in Camera mode.

0During color bar, menu screen and status screen display, the “Mirror” setting is disabled. (A P119 [Color Bar Output] )

Shooting Assist ItemFocus Assist

For setting whether to add color to the contour of the focused image upon switching the image to black-and-white.

[Setting Values: On, ROff]

9TypeFor specifying the operation when the [FOCUS ASSIST/1] button is pressed.

(A P46 [Focus Assist Function] )

0ACCU-Focus:

Enables the Focus Assist and ACCU-Focus (forced focus) functions. The depth of field of the object becomes shallower to enable easier focusing. The ACCU-Focus function switches automatically to “Off” after about 10 seconds.

0Normal:

Enables only the Focus Assist function. The focused area is displayed in color to enable easier focusing. Display color can be specified with [Color].

[Setting Values: ACCU-Focus, RNormal]9Color

For setting the display color of the focused area when Focus Assist is activated.

[Setting Values: RBlue, Green, Red]Zebra

For selecting whether to display zebra patterns at the bright areas of the subject.

Select “On” to display zebra patterns or “Off” tohide.

[Setting Values: On, ROff]

9TopFor setting the maximum luminance level for the zebra pattern display.[Setting Values: Over, 100% to 5% (in 5% increments)] (R80%)9BottomFor setting the minimum luminance level for the zebra pattern display.[Setting Values: 100% to 0% (in 5% increments)] (R70%)

Memo :

0The relation between Top and Bottom is such that Top>Bottom always holds. To maintain this relation when setting Top, the Bottom value is automatically corrected.

98