Settings Detailed and Display Menu

Audio Set ItemInput1 Mic Ref.

For setting the reference input level when the [INPUT1] selection switch is set to “MIC” or “MIC

+48V”.[Setting Values: -62dB, -56dB, R-50dB, -44dB, -38dB]Input2 Mic Ref.

For setting the reference input level when the [INPUT2] selection switch is set to “MIC” or “MIC

+48V”.

[Setting Values: -62dB, -56dB, R-50dB, -44dB, -38dB]

Int. Mic Gain

For setting the sensitivity of the built-in microphone. [Setting Values: +12dB, +6dB, R0dB]

AUX GainFor setting the sensitivity of the [AUX] terminalinput.[Setting Values: +12dB, +6dB, R0dB]Ref. Level

For setting the audio reference level to be recorded to the SD card. (Applies to both [CH1/CH2].)

[Setting Values: -12dB, -18dB, R-20dB]LimiterFor setting the limiter operation.0 Ref. Level:Sets “Ref. Level” to the maximum recordinglevel.0 -8dBFS, -5dBFS:Sets “-8dBFS” or “-5dBFS” to the maximumrecording level.

0 Off:

Depending on the settings of the [CH1/CH2 AUTO/MANUAL] selection switches, the

operation may be different as described below. 0 The limiter does not function when

“MANUAL” is set.0The limiter functions at -5 dBFS when “AUTO” is set.[Setting Values: Ref. Level, -8dBFS, R-5dBFS, Off]AGC Response9Attack TimeSets the time to activate the limiter. [Setting Values: Fast, RMiddle, Slow]9Decay Time

Sets the time to deactivate the limiter operation. [Setting Values: Fast, RMiddle, Slow]

AGC ModeFor setting whether to link the limiter operation of [CH1] and [CH2].

Select “Link” to link or “Separate” to separate. [Setting Values: Link, RSeparate]

Memo :

0Enabled only when both the [AUX] input terminal and [INPUT1/INPUT2] input terminal are set to “LINE” or “MIC”, and CH1/CH2 of the [CH1/CH2 AUTO/MANUAL] switch is set to “AUTO”.

XLR Manual Level

For setting whether to link manual audio adjustment operation between [INPUT1] and

[INPUT2] terminals.

Select “Link” to link or “Separate” to separate. [Setting Values: Link, RSeparate]

Memo :

0Enabled only when both the [INPUT1/INPUT2] input terminals are set to “LINE” or “MIC”, and both [CH1]/[CH2] of the [CH1/CH2 AUTO/ MANUAL] selection switches are set to “MANUAL”.

Int. Mic Separation

For setting the enhancement level of the stereo effect of the built-in microphone.

0 1 to 4:Enhances the stereo effect. Increasing the value increases the stereo effect.0 Effect off:Does not enhance the stereo effect.0 Mono:

Sets the built-in microphone to monaural. [Setting Values: 1 to 4, Effect off, Mono (R2)]

Memo :

0When any value from 1 to 4 is selected, the sound quality changes slightly due to the process of enhancing the stereo effect. This is normal.

0This menu is enabled when the [CH1]/[CH2] selection switch is set to “INT”.

102