Marker Settings Item

For setting the marker and safety zone, which are useful in helping you determine the angle of view for the image according to the shooting purpose.

(A P119 [Marker and Safety Zone Displays (Camera Mode Only)] )

Memo :

0During Clip Review or when in the Media mode, the markers do not appear regardless of the setting.

Marker Settings

For setting whether to display marker, safety zone, and center marks on the screen.

[Setting Values: On, ROff]

9Aspect Ratio

For selecting the final image aspect ratio to be used from the overall angle of view.

[Setting Values: 16:9(+4:3), 2.35:1, 1.85:1, R16:9, 1.75:1, 1.66:1, 14:9, 13:9, 4:3, 2.35:1 Center, 2.35:1 Top, 1.85:1 Center, 1.85:1 Top]

Memo :

0When [System] menu B[Record Set] B[Record Format] B [SD Aspect] is set to “4:3”, this item is fixed at “4:3” and cannot be selected.

(A P106 [ SD Aspect ] )

9Aspect Marker

For specifying how boundary markers are to be used to indicate the parts of an image that are beyond the range of the aspect ratio selected in [Aspect Ratio].

0 Line+Halftone:Displays the boundary using lines, and areas outside the boundary in halftone.0 Halftone:Displays areas outside the boundary in halftone.0 Line:Displays the boundary using lines.

0 Off:

Hides the boundary markers.[Setting Values: Line+Halftone, Halftone, Line, ROff]

Memo :

0When [Aspect Ratio] is set to “16:9” or “16:9(+4:3)”, this item is fixed at “Off” and cannot be selected.

9Safety Zone

For setting the percentage of area that is to be deemed as valid area (Safety Zone) within the boundary of the aspect ratio selected in [Aspect

Ratio].[Setting Values: 95%, 93%, 90%, 88%, 80%, ROff]9Center Mark

For specifying whether to display a mark to indicate the screen center within the aspect ratio selected in [Aspect Ratio].

[Setting Values: On, ROff]

Display Settings ItemThis menu is used to set the displays on the LCD monitor and viewfinder screen.ZoomFor setting the display method of the zoom position.0 Number:Displays the zoom position in numbers (0-99).0 Bar:Displays the zoom position in a bar.

0 Off:

Does not display the zoom position. [Setting Values: Number, RBar, Off]FocusFor setting the display method of the focal length during manual focus.0 Feet:Displays the focus in feet.0 Meter:Displays the focus in meters.

0 Off:

Does not display the focal length during focus. [Setting Values: Feet, RMeter, Off]

ND FilterFor setting whether to display the filter position. [Setting Values: ROn, Off]

Record Format

For setting whether to display the video format during recording or playback.

[Setting Values: ROn, Off]

Settings Detailed and Display Menu

99