JVC GY-HM600E, GY-HM600U manual 131

Symptom			Action
Images on the LCD monitor	0		Readjust the brightness of the LCD monitor and viewfinder.
and viewfinder screen appear	0		Is the [ND FILTER] switch set to “1/64”?
dark or blurred.	0		Is the iris closed?
	0		Is the shutter speed setting too high?
	0		Is the amount of peaking too little? Use the [PEAKING +/-] button to
			adjust the contour for the LCD monitor and the viewfinder screen.
		(A P34 [Adjusting the LCD Monitor] )
		(A P35 [Adjusting the Viewfinder] )
The [CH1/CH2] recording level	0		Is the [CH1/CH2 AUTO/MANUAL] switch set to “AUTO”?
adjustment knob does not	0		Is the [FULL AUTO] switch set to “ON”?
work.			Is the [FULL AUTO] switch set to “ON”, and [Audio On FULL AUTO]
			in [Audio Set] of the [A/V Set] menu set to “Auto”?
		(A P103 [ Audio On FULL AUTO ] )
SD card cannot be initialized	Is the write-protect switch of the SD card turned on?
(formatted).	Make sure that the write-protect switch is turned off.
		(A P37 [Write-Protect Switch on the SD Card] )
Battery alarm appears even	Is the battery too old?
after loading a charged
battery.
The time code and user’s bit	0		Even in Camera mode or Media mode, the time code and user’s bit
are not displayed.			may not be displayed depending to the type of display.
	0		Is [TC/UB] of [Display Settings] in the [LCD/VF] menu set to “Off”? To
			display the time code and user’s bit, set it to “TC” or “UB”.
		(A P100 [ TC/UB ] )
The date and time are not	0		The date and time are only displayed on the Display 1 and Display 2
displayed.			screens in the Camera mode (during shooting).
		(A P112 [Display Screen in Camera Mode] )
	0		Is [Time Stamp] of [Record Set] in the [System] menu set to “On”? To
			display the time code and user’s bit, set it to “Off”.
		(A P107 [ Time Stamp ] )
Incorrect display on the	Is the LCD monitor used with [LCD + VF] in the [LCD/VF] menu set to “Off”?
viewfinder.		(A P97 [LCD/VF Menu] )
The actual recording time is	0		The recordable time may be shorter depending on the shooting
				Others
shorter than the estimated	0		conditions or the subject.
The two camera recorders are			Is the [TC IN/OUT] switch correctly set?
time.
not synchronized even though		(A P64 [Synchronizing Time Code on Another Camera] )
the time codes have been	0		Set [System] B [Record Set] B [Record Format] B [Frame & Bit
synchronized. (Zon the Slave			Rate] such that the two camera recorders have the same frame rate.
device is not displayed.)		(A P106 [ Frame & Bit Rate ] )

131