Playback

Playing Recorded Clips

To play back clips recorded on SD cards, switch to the Media mode.

Press and hold the [MODE] selection button in

Camera mode to enter Media mode. A thumbnail screen of the clips recorded on the SD card is displayed.

You can play back the selected clip on the thumbnail screen.

Memo :

0When an SD card without any clips is inserted, “No Clips” is displayed.

Operation Buttons

Use the operation buttons, on the side control panel of the camera recorder or the LCD monitor, to operate the thumbnail screen.

F [OIS/2] Button

0Switches the selection status of the clip selected by the cursor.

0Clips being selected are displayed with check mark.

G [LOLUX/3] Button

Enters the action selection screen.

H [DISPLAY] Button

Switches between the “Standard Screen” and

“Detailed Screen”.

I [STATUS] Button

Displays the media information screen.

Thumbnail Screen

0“Standard Screen” and “Detailed Screen” are available.

Use the [DISPLAY] button to switch between the screens.

0Thumbnails are displayed in order of recording from the oldest to most recent.

A

DISPLAY STATUS

Standard screen

MENU/THUMBD

B I H

CANCEL

 

 

 

 

C

 

 

MENU/THUMB

AE LEVEL

 

 

A

 

 

 

 

 

 

D

 

 

 

FOCUS ASSIST/1

OIS / 2

LOLUX / 3

B

TIME CODE

 

 

CANCEL

 

 

C

E

F

G

.

A [MENU/THUMB] Button

0Displays the menu.

0Press this button to close the menu screen during menu display and return to the thumbnail screen.

B [CANCEL] (Stop) Button

Cancels settings and returns to the previous screen.

C Set (Play) Button

0 Sets the values and items. (Confirm)

0 Plays back the selected clip.

D Cross-Shaped Button (JKHI)

Moves the cursor.

E [FOCUS ASSIST/1] Button

0Switches the OK mark of the clip selected by the cursor.

0If an OK mark has been appended, it will be deleted. Otherwise, an OK mark will be appended.

J

AI B

C

DH

E

G

F

 

.

A SD Card Information

0 Displays the status of the inserted SD card, selected SD card, write-protect switch, and the need for restoring.

0 Use the [SLOT A/B] switch to switch slots. Clips in slot A and B cannot be displayed at the same time.

Wz : Write-protect switch of the SD card in slot A is set.

S : SD card in slot B needs to be restored or formatted, or is an unsupported SD card.

B Clip Mark

Displays the clip information (properties).

AE

BD

C

.

A OK Mark

Clip is appended with OK mark.

78