Settings Detailed and Display Menu

Camera Function Menu

Menu screen for specifying operation settings during shooting.This item can only be selected in the Camera mode.BarsFor setting whether to output color bars. [Setting Values: On, ROff]

Memo :

0The audio test signals (1 kHz) can be output simultaneously with the color bar output. (A P103 [ Test Tone ] )

OIS

For setting whether to enable image stabilizer. When “On” is selected, set the Level.

[Setting Values: On, ROff]9LevelFor setting the level of the image stabilizer. [Setting Values: High, RNormal]

Memo :

0When “High” is selected, correcting severe camera shake may cause the area surrounding the image to darken.

Flicker Correction

For setting whether to adjust image flicker that occurs under a fluorescent light.

[Setting Values: On, ROff]

Shutter

For specifying shutter-related settings.

Use this item to set to “Step” (fixed value) or “Variable” when operating with the cross-shaped

button (JK) on the right side.0 Variable:Sets to variable scan. Use this setting such as when shooting a PC monitor.0 Step:Sets to step shutter, which switches the shutter speed by a fixed value.[Setting Values: Variable, RStep]AE LevelFor setting the convergence level during AE (Auto Exposure).This can also be adjusted using the cross-shaped button (HI) on the right side.[Setting Values: -6 to +6 (R0)]AE SpeedFor setting the convergence speed during AE (Auto Exposure).[Setting Values: RFast, Middle, Slow]ALC LimitFor setting the maximum gain value of “ALC”,

which electrically boosts the sensitivity level according to the brightness automatically. [Setting Values: 24dB, R18dB, 12dB, 6dB]

Auto Iris Limit (OPEN)For setting the limit value of the OPEN end when auto iris is enabled.[Setting Values: F5.6, F4, F2.8, F2, RF1.6]Auto Iris Limit (CLOSE)For setting the limit value of the CLOSE end when auto iris is enabled.[Setting Values: F11, RF8, F5.6]

90