JVC GY-HM600E, GY-HM600U Error Message, White Paint Adjustment

	White Detection
OPERATION
AUTO WHITE A	Frame

[AWB] Activating

AUTO WHITE A

OK

Result Display

.

Caution :

0Do not use highly reflective objects, such as metals. Doing so may result in improper white balance adjustment.

0The Auto White function cannot provide optimum white balance with an object outside the adjustment range, for example when it contains only a single color or not enough white color.

Error Message

If the white balance adjustment is not correctly completed, one of the following messages will appear for about 3 seconds.

Message	Status
NG : OBJECT	The object used is defective.
	Displayed when there is not
	enough white color on the
	object, or when the color
	temperature is not suitable.
	Use another white object and
	adjust the white balance
	again.
ERROR : LOW	Insufficient illumination.
LIGHT	Displayed when the lighting is
	dark. Increase the lighting
	and adjust the white balance
	again.
ERROR : OVER	Excessive illumination.
LIGHT	Displayed when the lighting is
	too bright. Decrease the
	lighting and adjust the white
	balance again.

White Paint Adjustment

You can fine-tune the white balance saved in Memory A or Memory B.

1Select [AWB Paint] in the [Main Menu] B [Camera Process] B [White Balance] menu, and press the Set button (R).

The White Paint Adjustment screen appears.

1

Shooting

.

2Adjust the R and B values.

Use the cross-shaped button (JK) to adjust R value and (HI) to adjust B value.

.

3Press the Set button (R).

Returns to the [White Balance] screen.

R Value

B Value

.

Memo :

0Selecting [y] will usually clear the White Paint Adjustment value. But when [Main Menu] B [Camera Process] B [White Balance] B [Clear Paint After AWB] is set to “Off”, values will not be cleared even when [y] is selected.

(A P96 [ Clear Paint After AWB ] )

55