Settings Detailed and Display Menu

White Balance ItemPreset Temp.For setting the color temperature when the [WHT BAL] switch is set to “PRESET”.For details, refer to “[Adjusting the White Balance] P 53”.Alternative Temp.For setting the alternative color temperature in the Preset mode.When the [WHT BAL] switch is set to “PRESET”,

pressing the [y] button each time switches the color temperature setting in the Preset mode. ([Preset Temp.] 1 [Alternative Temp.])

For details, refer to “[Adjusting the White Balance] P 53”.

AWB Paint

For adjusting the R (red)/B (blue) component in the AWB (Auto White Balance) mode.

For details, refer to “[Adjusting the White Balance] P 53”.

0 Increase the number: Strengthens the red/blue.0 Decrease the number: Weakens the red/blue.[Setting Values: -32 to +32 (R 0)]

Memo :

0This item is selectable when the [WHT BAL] switch on the right of the camera recorder is set to “A” or “B”. When “PRESET” is set, this item appears as “---” and cannot be selected.

0Different values can be specified for “A” and “B”.

0After the [y] (Auto White Balance) button is pressed to readjust the white balance while [Clear Paint After AWB] is set to “On”, R and B values switch automatically to “0”.

Clear Paint After AWBFor specifying whether to clear the [AWB Paint] (Rvalue and B value) settings after executing AWB (Auto White Balance).0 On:

Sets the [AWB Paint] (R value and B value) settings to “0” after executing AWB (Auto White

Balance).

0 Off:

Does not change the [AWB Paint] (R value andB value) settings after executing AWB (Auto White Balance).[Setting Values: ROn, Off]FAW Paint

For adjusting the R (red)/B (blue) component during FAW (Full Auto White Balance) mode.

0 Increase the number: Strengthens the red/blue.

0 Decrease the number: Weakens the red/blue.

[Setting Values: -32 to +32 (R 0)]

TC/UB Menu

Menu screen for setting time code and user’s bit. This item cannot be selected in the Media mode, or during recording.

TC GeneratorFor setting the operation of the time code.0 Free Run(Ext):

External time code input will be synchronized with this and the time code will be recorded.

0 Free Run:

The time code operates in the run mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off.

0 Rec Run:

The time code operates in the run mode during recording. It continues to run in the order of the recorded clips as long as the SD card is not replaced. If the SD card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card.

96