JVC GY-HM600E, GY-HM600U Setting Spot Meter, Max, Min, Item, Green, Green, Memo :, Yellow, Manual, Settings, Position, position, displayed, Max & Min, the screen, the screen

Setting Spot Meter

	The brightness of the object during shooting is
	displayed.
	This function is useful when setting video or stage
	lighting or when specifying camera exposure.
	A cursor indicating the location and the brightness
	(%) of that location are displayed in the images
	shown on the LCD monitor and viewfinder screen.
0		Zebra patterns display the brightness of output
		video signals.
		(A P65 [Setting Zebra Pattern] )
	0 This function allows you to check the brightness
Shooting		of input images from the lens without depending
		on image processing such as gamma curve. The
		above is displayed.
		dynamic range of the camera recorder is 400 %
		and a brightness range of 0 % to 400 % and

Memo :

0Spot meter may not be consistent with the zebra display range. When [Gamma] in the [Camera Process] menu is set to “Cinema”, the 100IRE output is not consistent with the 100 % display. When an object of more than 400 % luminance is detected, it is displayed as “400 %”.

(A P94 [ Gamma ] )

		Color of Frame
Item	Settings	Indicating the
		Position
Max & Min	Displays the	0 Max: Green
	brightness (%)	0 Min: Yellow
	and positions of
	the brightest and
	darkest areas in
	the screen.
	Frames may also
	be stopped at the
	current positions.
Max	Displays the	Green
	brightness (%)
	and position of the
	brightest area in
	the screen.
	Frames may also
	be stopped at the
	current positions.
Min	Displays the	Yellow
	brightness (%)
	and position of the
	darkest area in the
	screen. Frame
	may also be
	stopped at the
	current positions.
Manual	Displays the	Green

MENU/THUMB

CANCEL

.

MENU/THUMB

CANCEL

AE LEVEL

brightness (%) of	(Blinks in green
the specified	when specifying
position.	the position)

2Assign the “Spot Meter” function to any of the user buttons.

(A P36 [Assigning Functions to User Buttons] )

3Press the user button that is assigned with “Spot Meter”.

The operation switches as below when the button is pressed.

1Select the following in [Spot Meter] of the [Main Menu] B [Camera Function] B [User Switch Set] menu.

(A P92 [ Spot Meter ] )

66