Basic Shooting Procedures

2 Press the [REC] button to start recording to the
SD card.

This camera recorder has three [REC] buttons.

Any of the [REC] buttons can be used to start/

Preparations

2

4

4

stop recording by default.

The tally lamp lights up in red during recording.

0 Zoom Operation

(A P44 [Zoom Operation] )

0 Adjusting the Focus Manually

(A P45 [Focus Operation] )

Memo :

0 If both the slots are loaded with recordable cards

in the factory default, pressing the [REC] button

Shooting

3

POWER

1

 

ON

 

 

OFF

 

 

(CHG)

 

MODE

 

.

1Supply battery or AC adapter power to the camera recorder.(A P26 [Power Supply] )2Insert an SD card. (A P37 [SD Card] )

3Turn on the power of the camera recorder. Hold down the lock button (blue) at the center of the [POWER ON/OFF(CHG)] switch to set to “ON”. The camera recorder starts up in Camera mode and is ready for recording.

4Adjust the angle of the LCD monitor and viewfinder.

(A P34 [Adjusting the LCD Monitor and Viewfinder] )

Shooting

1Configure the video and audio input settings. You have to configure video settings such as brightness adjustment (iris, gain, shutter) and white balance adjustment in order to start shooting. You also have to adjust the audio input settings and audio recording level for audio recording.

0 Adjusting the Brightness(A P48 [Adjusting the Brightness] ) 0 Adjusting the White Balance(A P53 [Adjusting the White Balance] ) 0 Adjusting Audio Input Settings andRecording Level

(A P57 [Audio Recording] )

starts recording only to the media in the selected

slot. When [Slot Mode] in the [Main Menu]

B

[System] B [Record Set] menu is set to “Dual”,

recording can be performed simultaneously to

the cards in both the slots.

 

(A P69 [Dual Rec] )

 

0 The tally lamp can be turned off with [Tally

 

Lamp] in the [System] menu.

 

(A P104 [ Tally Lamp ] )

 

3Check the most recently captured images. Press the [C.REVIEW/7] button on the lens0

to activate the Clip Review function. The most recently captured images are played back on the LCD monitor and viewfinder screen.

0 After playback, the camera recorder returns to standby mode (STBY).

(A P68 [Viewing Recorded Videos Immediately (Clip Review)] )

Memo :

0[Clip Review] is assigned to [C.REVIEW/7] button in factory default.0[Clip Review] can also be assigned to other user buttons.

(A P36 [Assigning Functions to User Buttons] )

42