JVC GY-HM600E, GY-HM600U STBY, slot, RREC, red), STOP, mode, RRECP, RRECC, STBYC, pause, STBYN, RRECN, RRECM, STBYM, P.OFF, Memo :, Memo :, REVIEW, STBY P, STBY C, STBY N, STBY M

T Zoom Display0 Displays the zoom position. (Zoom bar or value)

0 The zoom bar will only be displayed for 3 seconds after the zoom operation is activated.

0 The value will always be displayed. (0 to 99)

Memo :

0 You can specify the display method (Number/ Bar) or turn off the display in [Main Menu] B

[LCD/VF] menu B [Display Settings] B “Zoom”. This item will not be displayed when “Off” is

selected.(A P99 [ Zoom ] )0 Displayed in the Display 0 screen only when there is a change.UTime Code (I)/User’s Bit (J) Display0 Displays the time code (hour: minute: second: frame) or user’s bit data.0 Example of time code display:0 0 : 0 0 : 0 0 : 0 0

※

.

*Colon (:) denotes non-drop frames and dot (.) denotes drop frames.0Example of user’s bit display:FF EE DD 20

.

Memo :

0You can specify whether to display the time code, user’s bit, or turn off the display in [LCD/VF] menu B[Display Settings] B[TC/UB]. This item will not be displayed when “Off” is selected.

(A P100 [ TC/UB ] )

V Time Code Lock Indicator

When the built-in time code generator is synchronized to the external time code data input during the synchronization of time code with another camera recorder, Zlights up.

(A P64 [Synchronizing Time Code on Another Camera] )

W Event/Warning Display AreaDisplays error messages.

(A P128 [Error Messages and Actions] )

X Media Status	: No card found in the selected
----
STBY	slot
	: Recording standby
RREC	: Recording
REVIEW	: Clip Review
(AP68 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P	: Pre Rec recording standby
(A P73 [Pre Rec] )
RRECP	: Pre Rec recording
(A P73 [Pre Rec] )
STBY C	: Clip Continuous Rec recording
	standby
(A P73 [Clip Continuous Rec] )
RRECC	: Clip Continuous Rec recording
(A P73 [Clip Continuous Rec] )
STBYC	: Clip Continuous Rec recording
(displayed in	pause
yellow)
(A P73 [Clip Continuous Rec] )
STBY N	: Interval Rec recording standby
(A P76 [Interval Rec] )
STBYN	: Interval recording pause
(displayed in
red)	: Interval Rec recording
RRECN
(A P76 [Interval Rec] )
STBY M	: Frame Rec recording standby
(A P75 [Frame Rec] )
RRECM	: Frame Rec recording
(A P75 [Frame Rec] )
STBYM	: Frame Rec recording pause
(displayed in
yellow)
(A P75 [Frame Rec] )
STOP	: Unable to record to the card in
P.OFF	the slot
	: Power OFF

Y Dual Rec/Backup Rec Display

“DUAL” is displayed in the Dual Rec mode and “BACKUP” is displayed in the Backup Rec

mode.

(A P107 [ Slot Mode ] ) Memo :0This item is not displayed when [Slot Mode] is set to “Series”.

0Displayed in the Display 0 and Display 1 screens during warnings only. (When the remaining time is shorter than 3 minutes)

Screen Display/Status

115