Preset Mode (PRESET)

0Two different color temperature settings are registered on this camera recorder. You can switch between them using the [y] button. (Default setting: “3200K” 1 “5600K”)

0Press the [y] button to switch to a different color temperature.(“Preset Temp.” 1 “Alternative Temp.”)1 Set the [WHT BAL B/A/PRESET] switch to “PRESET”.2Press the [y] button.

Shooting

Setting the [Preset Temp.] or [Alternative
settings in the Preset mode in the menu.

 

Temp.] Values

 

You can change both the color temperature

 

1 Open the [Preset Temp.] or [Alternative

 

Temp.] menu.

 

0 Select [Main Menu] B [Camera Process] B

 

[White Balance] menu B [Preset Temp.]

 

and [Alternative Temp.], and press the Set

 

button (R).

 

0 The Color Temperature setting screen

 

appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color Temperature

 

 

 

Detailed Selection

Color Temperature Selection Screen

 

 

 

Screen

.

2Select the color temperature. When selecting from a setting Temperature Selection screen), cross-shaped button (JK) to select temperature.

[Setting Values: 7500K, 6500K, 5600K, 5200K, 4800K, 4200K, R3200K, 3000K, 2800K]

To select detailed values (Color Temperature Detailed Selection screen)

Press the cross-shaped button (I) to display the Color Temperature Detailed Selection screen.

Use the cross-shaped button (JK) to select a color temperature.[Setting Values: 2300K to 15000K (in

100K increments)]0000value (Coloruse thethe color

Memo :

0Use the cross-shaped button (I) to switch between the Color Temperature Selection screen and the Color Temperature Detailed Selection screen.

Memory A Mode (A), Memory B Mode(B)

0Set to the white balance saved in Memory A or Memory B.

0When the [WHT BAL B/A/PRESET] selection switch is set to “A” or “B”, press the [y] button to execute white balance. The white balance will be automatically adjusted and the adjusted value will be saved in Memory A or Memory B.

1Prepare the camera recorder.

ASet the [POWER ON/OFF(CHG)] switch to “ON”. B Press the [IRIS] button to set to the Auto mode. C Set the [FULL AUTO] switch to “OFF”.

2Set the [ND FILTER] switch according to the lighting.

(A P53 [Setting the ND Filter] )

3Set the [WHT BAL B/A/PRESET] selection switch to “A” or “B”.

4Locate a place with similar lighting conditions as the object to be shot, place a white object near the center of the screen and zoom in to fill the screen with white.

5Press the [y] (Auto White Balance) button. 0 The white detection frame appears when Auto White Balance is activated. Fill the

frame with white completely.

0 “AUTO WHITE A OPERATION” or “AUTO WHITE B OPERATION” appears on the viewfinder when Auto White Balance is activated.

0 When the correct white balance is achieved, “AUTO WHITE A OK” or “AUTO WHITE B OK” appears for about 3 seconds together with the approximate color temperature.

54