Preparations

Initial Settings

When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears.

Set the date/time of the built-in clock in the [Initial Setting] screen.

All operations are disabled until initial settings are complete.

 

 

MENU/THUMB

 

 

CANCEL

MENU/THUMB

AE LEVEL

POWER

 

ON

OFF (CHG)

MODE

CANCEL

.

Memo :

0It is recommended to use the AC adapter as the power supply.

0Be sure to close the lens cover.

1 Hold down the lock button (blue) at the center of the [POWER ON/OFF(CHG)] switch to set to “ON”.

The Initial Setting screen appears.

2Ensure that the lens cover is closed, and press the Set button (R).

0 Self-diagnosis starts.

0 A progress bar appears, and “Complete Diagnosis” appears when the diagnosis is complete.

.

Memo :

0It takes about 6 minutes to complete the diagnosis. During the diagnosis, do not operate or turn off the camera recorder.

3Press the Set button (R) after confirming the exit screen.

The [Initial Setting] screen appears.

0For GY-HM600U

.

.

0 For GY-HM600E

.

30