EEI LimitFor setting the shutter speed control range when EEI is enabled.[Setting Values: 4F-stop, R3F-stop, 2F-stop]Smooth Trans

For setting the shock reduction function, which slows down the sudden change when switching with the [GAIN] or [WHT BAL] selection switch.

[Setting Values: Fast, Middle, Slow, ROff] Memo :

0However, this function is disabled when the [FULL AUTO] switch is set to “ON”, or when switching the gain selection switch that was set to “ALC”.

GAIN L/GAIN M/GAIN HFor setting the gain value of each position on the [GAIN] selection switch.This is fixed at “ALC” when the [FULL AUTO] switch is set to “ON”.[Setting Values: 24dB, 21dB, 18dB, 15dB, 12dB, 9dB, 6dB, 3dB, 0dB, -3dB, -6dB](Default values GAIN L: -6dB, GAIN M: 0dB, GAINH: 9dB)AE LEVEL SWFor specifying the operation of the cross-shaped button (HI) on the right side.0 AE LEVEL/VFR:

Sets the number of frames during Variable Frame Rec, and operates as the AE level setting button in other cases.

(A P77 [Variable Frame Rec] )

0 AE Level:Operates as the AE level setting button at all times.0 Disable:Disables the button.[Setting Values: AE LEVEL/VFR, RAE Level, Disable]Handle Zoom Speed

This function allows you to set the zoom speed of the zoom lever at the handle when the [ZOOM FIX/

VAR/OFF] switch is set to “FIX”. [Setting Values: 1 to 8 (R 5)]User Switch Set...For specifying user button related settings. (A P91 [User Switch Set Item] )
User Switch Set ItemUSER1 - USER7, LCD KEY▲/LCD KEY▶/LCD KEY▼/LCD KEY◀

By assigning one of the following functions to each of the [FOCUS ASSIST/1], [OIS/2], [LOLUX/3], [AE

LOCK/4], [ZEBRA/5], [MARKER/6], [C.REVIEW/7]

buttons or the cross-shaped buttons on the LCD monitor, these buttons can be used to control the assigned function (on/off, start, switch).

Set according to the shooting conditions. Usable only in the Camera mode.

[Setting Values: None, Zebra, Marker, Bars, Focus Assist, OIS, LCD Backlight, Lolux, AE Lock, Spot Meter, Face Detect, OK Mark, Clip Cutter Trig, Backup Trig, Clip Review, Load Picture File, White Balance, Preset Zoom1, Preset Zoom2, Preset Zoom3]

Lolux

To increase the sensitivity when in dim surroundings, set a value in the Lolux mode. [Setting Values: 36dB, R30dB]

Clip Review

For specifying the operation when any of the [USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],

[LCD KEY▼], or [LCD KEY◀] items is set to “Clip Review”.0 Last 5sec:Views about 5 seconds of the clip from the ending.0 Top 5sec:Views about 5 seconds of the clip from the beginning.0 Clip:Views the entire clip.[Setting Values: RLast 5sec, Top 5sec, Clip]

Memo :

0This item is selectable when any of the [USER1]- [USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD KEY◀] items is set to “Clip Review”.

Settings Detailed and Display Menu

91