JVC GY-HM600E, GY-HM600U Audio Recording, [MIC], Memo :, [LINE], Memo :, Setting, [MIC+48], Shooting, Caution :, Description, power supply, 0 Built-inMicrophone, a dynamic microphone

Audio Recording

You can record audio from the two channels (CH1/ CH2) in synchronization with video images on this camera recorder.

Select from the four options below to record the audio.0 Built-in Microphone0 Microphone connected to [AUX] terminal0 Microphone connected to [INPUT1] terminal0 Microphone connected to [INPUT2] terminal

INPUT1

INPUT2

AUX

POWER /CHG

CH1 CH2	INPUT1	INPUT2
INT	LINE
INPUT1	MIC
INPUT2	MIC
	+48V
	LCD BRIGHT	PEAKING
		FULL AUTO
AUTO
MANUAL		ON
		ON

CH1 CH2

OFF

Selecting Audio to Be Recorded in Each ChannelSelect the audio to be recorded in CH1/CH2.

-	Switch Setting	Connected Devices
CH1	INT	0 Built-in Microphone
		0 Microphone connected to
		[AUX] terminal
	INPUT1	Microphone connected to
		[INPUT1] terminal
CH2	INT	0 Built-in Microphone
		0 Microphone connected to
		[AUX] terminal
	INPUT1	Microphone connected to
		[INPUT1] terminal
	INPUT2	Microphone connected to
		[INPUT2] terminal

Memo :

0When “INT” is set, the built-in microphone is disabled if a microphone is connected to the [AUX] terminal; audio from the microphone connected to the [AUX] is recorded.

0Set the reference input level of “INT” using [Int. Mic Gain]/[AUX Gain] in the [Main Menu] B [A/V Set] B [Audio Set] menu.

(A P102 [ Int. Mic Gain ] )(A P102 [ AUX Gain ] )

Setting Input Channel to [INPUT1]/[INPUT2]

Select the audio to input to [INPUT1] and [INPUT2] terminals with the [INPUT1]/[INPUT2] mode switch.

Setting	Description
[LINE]	Use this setting when connecting to
	an audio device or other equipment.
	The reference input level is +4 dBu.
[MIC]	Use this setting when connecting to
	a dynamic microphone.
[MIC+48]	Use this setting when connecting to
	a microphone (phantom
	microphone) that requires a +48 V
	power supply.

Memo :

0Set the reference input level of “MIC” and “MIC +48V” using [Input1 Mic Ref.]/[Input2 Mic Ref.] in the [Main Menu] B [A/V Set] B [Audio Set] menu.

(A P102 [ Input1 Mic Ref. ] ) (A P102 [ Input2 Mic Ref. ] )

Caution :

0When connecting a device that does not require a +48 V power supply, make sure that it is not set to the “MIC+48V” position.

0When the [INPUT1]/[INPUT2] mode switch is set to “MIC”, make sure that a microphone is connected to the [INPUT1]/[INPUT2] terminal. If you increase the recording level when a microphone is not connected, noise from the input terminal may be recorded.

0When a microphone is not connected to the [INPUT1]/[INPUT2] terminal, set the [INPUT1]/ [INPUT2] mode switch to “LINE” or adjust the volume with the [CH1]/[CH2] recording level adjustment knob.

Shooting