JVC GY-HM600E, GY-HM600U media, Memo :, stopped, Caution :, Interval Rec, accumulated again, 4 Start recording, Frames] and pause, Frames] and pause, B “STBYN” (red text))

Interval Rec

In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one “clip” on the SD card.

In this mode, recording and pause are performed repeatedly at the specified time interval. Only the specified number of frames is recorded.

The recording can be written to the media as a single clip until it is stopped.

	Memo :
	0 Audio will not be recorded.
	0	Until a specified amount of recordings is
Shooting		accumulated, the file will not be written to the
		performed until the same number is
		media.
	0 After the specified number of frames is recorded
		and written to the media, recording will be
		accumulated again.
	0 If the specified amount is not reached when
		recording is stopped, normal recording is
		performed and frames are added to the ending
		of the clip until the amount is reached. (Padding)
	Press [REC]									Press [REC]
	(Interval Rec starts)								(Interval Rec stops)
				Recording resumes			Recording resumes
		[Rec Interval]				[Rec Interval]
										Normal	recording
			Pause		Pause			Pause		(Padding data)
			Records number of frames specified in [Rec Frames]
				Actual clips recorded to the media

.Specific amount of data

1Set [Rec Mode] to “Interval Rec”.

0Set [Main Menu] B [System] B [Record Set] B [Rec Mode] to “Interval Rec”.

(A P106 [ Rec Interval ] )0The display changes (“STBY”B“STBYN”).

2Set the number of frames to record in [Rec Frames].

Set using [Main Menu] B [System] B [Record Set] B [Rec Mode] B [Rec Frames].

(A P106 [ Rec Frames ] )

3Set the time interval to start recording in [Interval Rec].

Set using [Main Menu] B [System] B [Record Set] B [Rec Mode] B [Rec Interval].

(A P106 [ Rec Interval ] )

4 Start recording.
0	Press the [REC] button to record only the
	number of frames specified in [Rec
	Frames] and pause.
0	After the specified time in [Rec Interval] has
	passed, recording starts again to record only
	the number of frames specified in [Rec
	Frames] and pause.
0	Interval Rec continues until the recording is
	stopped.
	The display changes (“STBYN” B “RRECN”
	B “STBYN” (red text) B “RRECN”
	B “STBYN” (red text)).
0	The card slot status indicator blinks in green.

5Press and hold the [REC] button.

0The card slot status indicator lights up in green.

0The display becomes “STBYN”.

Caution :

0Do not remove the SD card during recording

(RRECN, red text) or recording pause (STBYN, yellow text).

0To remove the SD card during Interval Rec, press the [CANCEL] button, check that “STBYN” (white text) is displayed and the card slot status indicator is lighted in green before you remove the card.

0When [Main Menu] B [TC/UB] B [TC Generator] is set to “Free Run” or “Free Run(Ext)”, the time code will be recorded in “Rec Run”.

0Audio cannot be recorded. A x mark appears in the audio level meter display.

(A P113 [Audio Level Meter] )

76