JVC Model HR-DVS1U Simple Recording, 22EN, Select Recording, Channel, Set Tape Speed, Select Deck

22EN

SIMPLEPLAYBACKANDRECORDING(cont.)

Simple

Recording

Turn on the TV and select the AV mode.

EJECT	EJECT
	LAY

DV	STOP	CH	VHS
	REC	PAUSE

	LOAD A CASSETTE
	Insert a VHS (or S-VHS) cassette with the record safety
	tab intact, or a Mini DV cassette with the erase
1 protection switch set to "REC".
	SELECT DECK
2 Press VHS or DV. The VHS or DV indicator lights.
	SELECT RECORDING
	CHANNEL
	Press CH5° (+/–). Or press the appropriate NUMBER
	keys, then press ENTER. (The channel changes after a
3 few seconds whether you press ENTER or not.)
	SET TAPE SPEED
	Press SP/EP (SP/LP for the DV deck) to set the recording
4 speed.
5	START RECORDING
	Press and hold REC and press PLAY on the remote
	control, or press REC on the VCR's front panel.
	Video Calibration takes place at the beginning of
	both the first SP and the first EP recording after
	inserting the cassette (when Video Calibration is set
	to "ON" (VHS deck only) ☞ pg. 34).

NUMBER

ENTER

T W

1 2 3

2

4 5 6

PAUSE/RESUME

RECORDING

6 Press PAUSE. Press PLAY to resume recording.

7	8	9
	0	4
DV		CH
SP/EP 1		VHS
	DV	VHS

PLAY

PAUSE

REC

3 STOP

● During record pause, you can change the recording

channel by using the CH5°(+/–) buttons or NUMBER

keys.

Video Calibration will not take place if the tape

speed is changed while in record pause mode.

STOP RECORDING

Press STOP. Then press EJECT on the VHS or DV deck

7 to remove the cassette.

NOTES:

●It is not possible to record a TV program on both the VHS deck and the DV deck simultaneously.

In addition, it is not possible to record simultaneously from the same external input.

●When you record a tape on the DV deck with the recording speed set to "LP", we recommend that you play that tape back on this deck. Digital video recorder from other manufacturers may not be able to play the tape properly.