JVC Model HR-DVS1U VCR Plus+ Timer Programming, 40ENTIMERRECORDING, Enter Pluscode Number

40ENTIMERRECORDING

VCR Plus+®

Timer

Programming

Turn on the TV and select the AV mode.

DV CH VHS

	T	W	3
	1	2
			2
NUMBER	4	5	6
	7	8	9
CANCEL		0	4
			DV
			VHS
PROG.	1	DV	VHS

3

OK

Timer recording allows you to program the VCR to automatically record a program that will be broadcast at some future time. The timer record function can be programmed using the VCR Plus+ or Express Timer programming up to 6 shows each on the VHS and DV decks as far as a year in advance. (☞ pg. 40 or 44) The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record and the VCR's timer will be automatically programmed. (The PlusCode programming numbers are the numbers next to the program in most TV listing.)

1	LOAD A CASSETTE
	Insert a VHS (or S-VHS) cassette with the record safety
	tab intact, or a Mini DV cassette with the erase
	protection switch set to "REC".
	● The VCR’s power comes on automatically.
	● Select the recording deck by pressing VHS or DV.
2	ACCESS VCR PLUS+ SCREEN
	Press PROG. on the		VCR PLUS+
	remote control.
	● The clock must be set in
	order to access the VCR
	Plus+ screen. If you	PRESS NUMBER KEY (0–9)
	haven’t set the clock, the
		PRESS (+/–) TO SET
	Main Menu screen		EXPRESS PROGRAMMING
	appears after an error	PRESS (PROG.) TO END
	message is displayed.
	Refer to page 8 for the Plug & Play procedure or page
	10 for the clock setting procedure.
3	ENTER PLUSCODE NUMBER
	Press the appropriate		VCR PLUS+
	NUMBER keys to enter the
	PlusCode number printed		123
	in the TV listings for the
	TV program you wish to
	record and press OK.	PRESS NUMBER KEY (0–9)
	If the Guide Channel Set
	screen appears, go to step 4.			THEN (OK)
		PRESS (PROG.) TO END
	If the VCR Plus+ program
	screen appears, go to step 5.
	● To make corrections, press CANCEL and input the
	correct PlusCode number.
	INPUT RECEIVING CHANNEL
4	NUMBER		GUIDE CHANNEL SET
	The Guide Channel		GUIDE CH: 12
	Number, which is assigned
			VCR CH : –––
	to the TV or cable station
	for the PlusCode number
	that you entered in step 3,	PRESS NUMBER KEY (0–9)
	will appear automatically		OR (5,°), THEN (OK)
	on the Guide Channel Set	PRESS (PROG.) TO END
	screen. Input the number
	of the channel on which the broadcast for the PlusCode
	number is received on the VCR or cable box using the
	NUMBER keys, CH 5° or %Þ, then press OK.
	● The Guide Channel Set screen appears only when you
	input the PlusCode number of a station for which the
	Guide Channel number has not previously been set.
	● If you receive your channels with a cable box and if
	you have properly set your Controller, "CABLE CH"
	appears in place of "VCR CH". If not, refer to pages
	15 – 17.