JVC Model HR-DVS1U manual Express Timer Programming, SET Program Date, SET Channel Number

44ENTIMERRECORDING(cont.)

Express Timer Programming

Turn on the TV and select the AV mode.

DV VHS

T	2	W
1		3
		2
4	5	6

	ATE+/	8	9
	7
	–	0	4
			CH+/–
START+/–			VHS
PROG.
	1	DV	VHS
		STOP+/–	DV
		3

You can directly program the VCR’s timer to record up to 6 shows each on the VHS and DV decks, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 8 or 10).

LOAD A CASSETTE

1 Insert a VHS (or S-VHS) cassette with the record safety tab intact, or a Mini DV cassette with the erase protection switch set to "REC".

●The VCR comes on, and the counter is reset, automatically.

●Select the recording deck by pressing VHS or DV.

	ACCESS VCR PLUS+
	SCREEN
2 Press PROG..
	ACCESS PROGRAM
	SCREEN
	Press START +/–. (If you’re	VHS		PROGRAM 1
	just starting out,
3 “PROGRAM 1” appears.)			START			STOP
			– –:– –AM		=	– –:– –AM
			DATE			CH
			– –/– –/– –			– – –	SP
		PRESS (+/–, SP/EP, 8=DAILY,
			9=WEEKLY), THEN (0K)
		PRESS (PROG.) TO END
	SET PROGRAM START TIME
	Press START +/– to enter	VHS		PROGRAM 1
	the time you want
4 recording to start.			START			STOP
			8:00 AM		=	– –:– –AM
	● Press and hold START		DATE			CH
			– –/– –/– –			– – –	SP
	+/– to move in 30-	PRESS (+/–, SP/EP, 8=DAILY,
	minute increments, or
	press and release		9=WEEKLY), THEN (0K)
		PRESS (PROG.) TO END
	repeatedly to move 1
	minute at a time.
5	SET PROGRAM STOP TIME
	Press STOP +/– to enter the time you want recording to
	stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

	SET PROGRAM DATE
	Press DATE +/–. (The current date is displayed on
6 screen. The date you enter appears in its place.)
7	SET CHANNEL NUMBER
	Press CH +/–.
	● If you are using a DBS receiver, see "ATTENTION
	FOR DBS RECEIVER USERS" on next page.
	● Holding down CH +/– rapidly scans through the
	channels.