LAY
STOP
PAUSE
EN
61
START DUBBING
6 Engage the audio component's Play mode, then press PLAY to start the tape in your VCR. Audio dubbing begins at this point.
● 
blinks and 
is displayed on the front display panel.
● To stop dubbing temporarily, press PAUSE. Press PLAY to resume dubbing.
END AUDIO DUBBING
7 Press STOP to stop the tape in your VCR, and engage the audio component's Stop mode.
NOTES:
● When monitoring the sound during Audio Dubbing, the
|
|
| normal soundtrack is automatically selected. If you wish to | |
|
|
| hear the | |
|
|
| refer to the "Select The Soundtrack" section (☞ pg. 29) and | |
1 | T | W | select the soundtrack you wish to hear. (VHS deck only) | |
2 | 3 | ● Audio dubbing stops automatically when the counter reaches | ||
|
| 2 | ||
4 | 5 | 6 | "0:00:00", and the VCR enters the Play mode. Check the | |
7 | 8 | 9 | counter reading before dubbing. (VHS deck only) | |
● Audio dubbing is also possible using the rear AUDIO IN | ||||
|
|
| ||
| 0 | 4 | connectors. |
●Audio dubbing cannot be performed on a
|
| cassette that has had its record safety tab removed, or on a |
|
| Mini DV cassette that has had its erase protection switch set |
|
| to "SAVE". |
1 | DV VHS | ● When playing back an |
PLAY |
| The Soundtrack" section (☞ pg. 29) to select the soundtrack |
| you wish to hear. | |
|
| |
| PAUSE | ● Picture may be distorted during Audio Dubbing Pause. |
STOP |
| ● It may be unlawful to record or play back copyrighted |
|
| material without the consent of the copyright owner. |
|
| ● Audio dubbing is not possible using the DV IN/OUT |
|
| connector. |
| 3 |
|
