POWER
VCR/TV/CABLE/DBS
T | 2 | W |
1 | 3 |
|
|
|
| 2 | ENTER |
NUMBER | 4 | 5 | 6 |
|
|
|
|
|
|
| |
| 7 | 8 | 9 |
|
|
|
| 0 |
| 4 |
|
| 1 | DV | VHS |
|
|
STOP
TV CH +
TV CH – 
3
CABLE BOX BRAND NAME | BRAND CODE |
|
|
ARCHER | 01, 05, 17 |
CABLETENNA | 01, 17 |
CABLEVIEW | 15, 16, 17, 21, 25 |
CITIZEN | 15, 16, 17, 21, 25 |
CURTIS | 02, 08 |
DIAMOND | 01, 17 |
EASTERN | 19 |
GC BRAND | 15, 16, 17, 21, 25 |
GEMINI | 15 |
GENERAL INSTRUMENTS | 01, 04, 06, 11, 12, 15 |
HAMLIN | 10, 18, 19, 23 |
JASCO | 15 |
JERROLD | 01, 04, 06, 11, 12, 15 |
NOVAVISION | 02, 08 |
OAK | 07, 20 |
PANASONIC | 13, 14 |
PULSER | 15, 16, 17, 21, 25 |
RCA | 13, 14 |
REGAL | 10, 18, 19, 23 |
REGENCY | 19 |
REMBRANDT | 01, 16, 17 |
SAMSUNG | 05, 16, 24 |
SCIENTIFIC ATLANTA | 02, 08 |
SIGMA | 07, 20 |
SL MARX | 05, 16, 17, 24, 25 |
SPRUCER | 13, 14 |
STARGATE | 05, 15, 16, 17, 21, 24, 25 |
TELEVIEW | 05, 16, 24 |
TOCOM | 01, 04, 16 |
UNIKA | 01, 17 |
UNIVERSAL | 16, 17, 25 |
VIDEOWAY | 03, 09, 22 |
ZENITH | 03, 09, 22 |
|
|
EN
67
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands of cable boxes listed below. Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes.
TURN ON THE CABLE BOX
1 Turn the power on using the cable box’s remote control.
SET REMOTE CONTROL
MODE
2 Set the VCR/TV/CABLE/DBS switch on the VCR’s remote control to CABLE/DBS.
ENTER CABLE BOX BRAND
3 While holding down POWER on the VCR's remote control, use the NUMBER keys to enter the cable box brand number from the chart at bottom left and then press STOP. Follow the example shown below.
●Once you have set the remote control to operate the cable box, you don't have to repeat this step until you replace the remote control's batteries.
OPERATE CABLE BOX
4 First, press POWER to see if the cable box’s power goes off as it should. If it does, try other functions (TV CH +/– and the NUMBER keys can be used to operate the cable box).
●For some brands of cable box, you must press ENTER after having pressed the NUMBER keys.
●To return the remote to VCR control, set the VCR/TV/ CABLE/DBS switch to VCR.
NOTES:
●You must set the cable box brand for your remote control and the cable box brand for your Controller (☞ pg. 16) separately. The list of cable box brands that can be controlled by your remote control is different from the list of brands that can be controlled by your controller.
●Depending on the type of cable box, there may be cases where some or all functions cannot be operated using the remote control.
●It's not possible to set the remote control for both your cable box and a DBS receiver at the same time. You can only set the remote control to operate one of these units at a time.
(Ex.) To set remote control to RCA 14:
POWER |
|
|
|
1 | 4 | STOP | Release |
| |||
Hold down | Press in succession |
| |
