JVC Model HR-DVS1U manual Normal Dubbing, Pause Dubbing, End Dubbing, EN51, Stop, Load Cassettes

Normal

Dubbing

DV STOP PLAY

DUB REC PAUSE VHS

T	W	3
1	2
		2
4	5	6
7	8	9
	0	4
		DV
SP/EP 1		VHS
	DV	VHS

PLAY

PAUSE

REC

STOP

3 START

EN51

You can dub selected scenes on a tape, starting and stopping wherever you wish.

1	LOAD CASSETTES
	Insert a VHS (or S-VHS) cassette and a Mini DV
	cassette.
	SELECT DUBBING
2	DIRECTION
	Press → when you want playback on the DV deck and
	ORrecording on the VHS deck.
	Press ← when you want playback on the VHS deck and
	recording on the DV deck.
3	SET TAPE SPEED
	Press VHS or DV for the recording deck, then press
	SP/EP (SP/LP for the DV deck).
4	LOCATE START POINT
	For the playing deck:
	Press VHS or DV to selsct the playing deck.
	Press PLAY to start playback of the tape in the playing
	deck, and press PAUSE to pause playback when you
	find the point where you want to start dubbing.
	For the recording deck:
	Press VHS or DV to select the recording deck. Press and
	hold PAUSE and press REC so that the recording deck
	enters the Record-Pause mode.
5	START DUBBING
	Press START.
6	PAUSE DUBBING
	Press START.
7	END DUBBING
	Press STOP. Then press VHS or DV to select the playing
	deck and press STOP.

NOTES:

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.

●When dubbing from the VHS deck to the DV deck, also set "SOUND MODE" to the appropriate mode (☞ pg. 33).

When dubbing from the DV deck to the VHS deck:

●You can record the date and time by setting "DISPLAY" to "ON" (☞ pg. 27).

●You can also insert playback effects (☞ pg. 32).

●When dubbing a Mini DV tape that was produced by audio dubbing, you need to set "32kHz MODE" to the appropriate mode before playing the tape (☞ pg. 33).