JVC Model HR-DVS1U Insert Editing, Locate End Point, Vhs Deck Only, 62ENEDITINGcont, Recorder

62ENEDITING(cont.)

Insert Editing

Recorder Your VCR

Audio/Video cable (supplied)

Audio/Video signal

Another VCR

Player

NUMBER	T	W
1		2	3
			2
4		5	6
"0"		8	9
7
		0	4
			CH
1DV			VHS
		DV	VHS

PAUSE

3

JOG/SHUTTLE

JOG

SHUTTLE

VHS Insert Editing

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your VCR as the recorder.

Source tape

	Before insert editing		Normal audio
Recorded tape			track
		After insert editing
			Video/Hi-Fi
			audio track

DV Insert Editing

(SP Mode Only)

The picture is replaced with new one, while the audio soundtrack remains unchanged.

Use your VCR as the recorder.

1	MAKE CONNECTIONS
	Connect the player's VIDEO OUT or S-VIDEO OUT
	and AUDIO OUT connectors to your VCR's VIDEO IN
	or S-VIDEO IN and AUDIO IN on the front panel.
2	SELECT RECORDING DECK
	Press VHS or DV.
	● When using the DV deck as the recoding deck, press
	← so that the video and audio signals from the
	VIDEO/S-VIDEO and AUDIO L + R input connectors
	can be recorded.
3	SET INPUT MODE
	Press the NUMBER key "0" and CH so that "L-2"
	appears in place of a channel number.
	● Be sure to select the correct FRONT AUX INPUT
	("VIDEO" or "S-VIDEO"). (To select the correct AUX
	INPUT, follow steps 5 – 7 from the "Edit From A
	Camcorder" section ☞ pg. 57).
	LOCATE END POINT
4	(VHS DECK ONLY)
	Load the recording cassette into your VCR, and play it
	back to determine the edit-out point (the end of the
	segment to be replaced) using the JOG/SHUTTLE
	controls or pressing ª£and PAUSE.
	● To use the JOG dial/SHUTTLE ring, first press the
	JOG/SHUTTLE button on the remote control so that
	the button lights up.

NOTE:

Insert Editing is not possible with a Mini DV tape recorded in LP mode.