JVC Model HR-DVS1U manual Roubleshooting, Re-perform the VCR Plus+ setup, Procedure pg

72EN

TROUBLESHOOTING(cont.)

TIMER RECORDING

	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
7.	Cable channels are not automatically	● The Controller is not properly	Connect the Controller correctly
	switched during timer recording.	connected to the VCR.	(☞ pg. 15).
		● The output channel selected in the	After confirming your cable box’s
		Cable Box Set screen is incorrect.	output channel number, re-access the
			Cable Box Set screen and select the
			correct number (☞ pg. 16).
		● The cable box’s power is off.	Make sure the power is on before
			timer recording starts.
8.	Satellite channels are not automati-	● The Controller is not properly	Connect the Controller correctly
	cally switched during timer	connected to the VCR.	(☞ pg. 18).
	recording.	● The output channel selected in the	After confirming your DBS receiver’s
		DBS Receiver Set screen is incorrect.	output channel number, re-access the
			DBS Receiver Set screen and select the
			correct number (☞ pg. 19).
		● The VCR is not set correctly to	Set the correct DBS Receiver brand
		control the DBS Receiver.	code (☞ pg. 20).
		● The DBS receiver’s power is off.	Make sure the power is on before
			timer recording starts.
9.	Timer recording begins as sched-	● Even though you don't use an	Set "CABLE BOX SET" to "OFF"
	uled, but the channel is always	external Cable Box, "CABLE BOX	(☞ pg. 16).
	incorrect.	SET" is set to "ON".
10.We moved, and now the VCR		● The receivable stations in the new area	Re-perform the VCR Plus+ setup
	Plus+ system doesn’t work properly.	are received on different channels than	procedure (☞ pg. 42).
		those in the previous area.
11.	“PROGRAM FULL” is displayed on	● All 6 programs on the VHS or DV	Wait until a space in memory clears,
	the screen.	deck’s timer memory are used.	or cancel unnecessary program
			information (☞ pg. 46).
OTHER PROBLEMS

	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	When scanning channels, some of	● Those channels have been preset to	If you need the skipped channels,
	them are skipped over.	be skipped.	restore them (☞ pg. 14).
2.	The channel can’t be changed.	● Recording is in progress.	Press PAUSE to pause the recording,
			change channels, then press PLAY to
			resume recording.
3.	The remote control won’t operate	● The remote control brand setting is	Re-set the remote control to the
	my TV or cable box or DBS receiver.	incorrect.	correct brand (☞ pg. 66 or 67 or 68).
4.	Even though Auto or Semi-Auto	● The clock setting data received from	Select a different Host Channel during
	clock setting has been selected, the	the Host Channel is incorrect.	the Semi-Auto setting procedure
	clock is incorrect.		(☞ pg. 11), or perform the Manual
			setting procedure (☞ pg. 12).

ATTENTION

This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR does not operate correctly switch its power off and unplug the power cord from the AC supply. Wait for a while and then plug the power back in. Eject and check the condition of the cassette. If everything appears normal resume operating the VCR as usual.