JVC Model HR-DVS1U EN39, Select S-Vhs Et Mode, Super VHS ET VHS deck only, Access Main Menu

Super VHS ET (VHS deck only)

Your VCR is equipped with Super VHS ET that makes it possible to record with S-VHS picture quality on VHS cassettes.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS VHS MODE SET
2	SCREEN
	Move the highlight bar (arrow) to "VHS MODE SET" by
	pressing CH5° or%Þ, then press OK or #.
3	SELECT S-VHS ET MODE
	Move the highlight bar	VHS MODE SET
	(arrow) to "S-VHS ET" by
		= S-VHS ET	ON
	pressing CH5° or%Þ,	S-VHS MODE	ON
		VIDEO CALIBRATION	ON
	then press OK or #to set to	PICTURE CONTROL	AUTO
	"ON" or "OFF".	DIGITAL TBC/NR	ON
		VIDEO STABILIZER	OFF
		NEXT PAGE
		SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

NOTES:

●You cannot activate the S-VHS ET function...

...while recording is in progress.

...while timer-recording (incl. Instant Timer Recording

☞pg. 49) is in progress.

...while Video Calibration (☞ pg. 34) is in progress.

...when the VCR's power is off.

●S-VHS ET does not work with S-VHS tapes.

EN39

S-VHS ET

This facility allows recording with S-VHS picture quality on VHS cassettes. You can play back those cassettes recorded in S-VHS ET on a VCR equipped with S-VHS ET.

NOTES:

●To obtain the highest quality recording and playback pictures over a longer period on this model, S-VHS recording on S-VHS tape is recommended.

●You can play back S-VHS ET recordings not only on this VCR but also on another VHS VCR equipped with S-VHS ET.

*It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.

●S-VHS ET recordings can also be played back on an S- VHS VCR or a VHS VCR equipped with SQPB (S-VHS QUASI PLAYBACK) function. However, there may be cases where S-VHS ET playback is not possible on a particular VCR.

●Frequent still, frame-by-frame and slow-motion playback may damage the tape and cause picture degradation.

●With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recom- mended that you do test record beforehand to make sure whether better results can be obtained.

●High Grade tapes are recommended for superior results.

●Make sure that "VIDEO CALIBRATION" is set to "ON" at the Function screen (☞ pg. 34).

●During S-VHS ET playback, noise may appear depending on tape quality.

●Noise may appear during still, frame-by-frame and slow- motion playback.

●If the playback picture becomes blurred or interrupted, use a cleaning cassette.