Bobbin winding (continued)
[] Push the bobbin to the right°
[] With free end of the thread held inyour hand, depress the
foot control. Stop themachine when ithas madea fewturns,
and cut the thread close to the hole inthe bobbin.
[] Depress the foot control again. When the bobbin is fully
wound, itstops automatically, Return the bobbin winder to its
original position by moving the spindle to the left and cut the
thread.
[] Push the handwheet to the left toengage crutch
*The machine does notfunction until the clutch is
engaged.
NOTE" Position of the bobbin winder stopper isadjustable for
the required amount of thread on bobbin (example 1/2
full or full etc.).Use ascrewdriver and loosenthe screw
oneturn orless toadjust the positionof the bobbin winder
stopper. Do not take out the screw all the way_
[][]
[]
[]
............. J
2O