6.Place a coffee cup underneath the brew head. Do not attach the portafilter to the brew head.
7.Press the Espresso Button – it is not necessary to wait for the boiler to heat. This activates the water pump and fills the brewing boiler with water. After a few seconds, water will flow from the brew head. When the cup is full, press the Espresso Button again to stop the water pump. The brewing boiler is now ready for use.
8.Place the frothing pitcher under the nozzle of the frothing arm.
9.Slowly open the Steam Dial by turning it
10.When the pitcher is about half full, release the Hot Water Button and close the Steam Dial by rotating it clockwise until it stops. The frothing boiler is now ready for use.
11.If no espresso is desired at this time, press the On/Off Power Switch to turn the espresso machine off.
NOTE: Do not press the Espresso or Hot Water Buttons without water in the reservoir. Damage to the water pump may occur.
FEATURES AND OPERATION
15