TRITON Training Guide
37
TRITON's effects are grouped by category, and the tabs at the left of the center menu list the
seven available effect categories.
18. From the center menu, press 011: StExciter/Enhncr, then press OK.
19. Play the keyboard to hear the newly - applied insert effect - a stereo exciter / enhancer. Note that there
are now four stereo insert effects in this Program.
20. Press the COMPARE key and play, to compare your new edit with the original effect settings.
21. Press the COMPARE key again, to recall the new edit, then press the IFX4 tab. You'll see this insert
effect's parameters and modulation source settings. Try slight adjustments for the Enhancer Depth and
Emphatic Point, and LEQ / HEQ gain parameters as you play…better yet:
22. Turn on the Arpeggiator (ARPEGGIATOR ON/OFF key) (lit). Now play notes / chord to trigger the
arpeggio pattern assigned to this Program, and work with the effect parameters as the pattern plays -
another great application for the Arpeggiator!
23. Turn off the Arpeggiator (ARPEGGIATOR ON/OFF key) (dark).
Copy an insert effect from another Program:
24. Press the Insert FX tab, then press the Insert FX Page menu button (upper - right of the display).
25. Press Copy Insert Effect.
26. Press the popup button to the left of the Program name in the From: field of the display. You'll see a
center menu, and on each side - Bank tabs.
27. Press the Bank B tab, then press B000: Synth Sweeper, and press OK.
28. In the To: field of the display, you'll copy IFX1 to IFX2: Press the lower IFX1 popup button, then
press IFX2.
29. Press OK - IFX1 (a stereo BPM Delay) from Program B000 will be copied to IFX2 of the current
Program.
Write the edited Program to a new location:
30. Press the Insert FX Page menu button (upper-right corner), then press Write Program.